| Eddy current testing of artificial defects in 316L stainless steel samples made by additive manufacturing technology M Geľatko, M Hatala, F Botko, R Vandžura, J Hajnyš Materials 15 (19), 6783, 2022 | 16 | 2022 |
| Stress relieving heat treatment of 316L stainless steel made by additive manufacturing process M Gel’atko, M Hatala, F Botko, R Vandžura, J Hajnyš, M Šajgalík, J Török Materials 16 (19), 6461, 2023 | 11 | 2023 |
| Longitudinal critically refracted (LCR) ultrasonic wave for residual stress measurement M Geľatko, M Hatala, R Vandžura, F Botko IOP Conference Series: Materials Science and Engineering 1199 (1), 012060, 2021 | 9 | 2021 |
| Effect of hardening temperature on maraging steel samples prepared by direct metal laser sintering process R Vandzura, V Simkulet, M Gelatko, M Hatala, Z Mitalova Machines 11 (3), 351, 2023 | 6 | 2023 |
| Machining of wood plastic composite using AWJ technology with controlled output quality Z Mitaľová, F Botko, R Vandžura, J Litecká, D Mitaľ, V Simkulet Machines 10 (7), 566, 2022 | 6 | 2022 |
| Evaluation of tribological characteristics of material prepared by DMLS technology V Simkulet, D Duplakova, A Kovalcikova, M Hatala, F Botko, Z Mitalova, ... MM Sci. J 10, 4941-4945, 2021 | 4 | 2021 |
| Evaluation of the Depth and Width of Cuts after Controlled-Depth Abrasive Water Jet Machining Using Low Pressure F Botko, D Botkova, M Gelatko, R Vandzura, D Klichova Materials 16 (24), 7532, 2023 | 2 | 2023 |
| Green Machining of NFRP Material Z Mitaľová, D Klichová, F Botko, J Litecká, R Vandžura, D Mitaľ Machines 11 (7), 692, 2023 | 2 | 2023 |
| Modeling and Measurement of Tool Wear During Angular Positioning of a Round Cutting Insert of a Toroidal Milling Tool for Multi-Axis Milling M Gdula, L Knapčíková, J Husár, R Vandžura Applied Sciences 14 (22), 10405, 2024 | 1 | 2024 |
| Evaluation of the Yield Strength of a Carbon Composite Material Prepared by Wet Lamination and Vacuum Bag Molding R Vandžura, V Simkulet, M Hatala, D Dupláková, F Botko TEM Journal 10 (3), 1045, 2021 | 1 | 2021 |
| EVALUATION OF ELECTRON BEAM WELDED JOINTS PROPERTIES OF ADDITIVELY MANUFACTURED AND CONVENTIONAL ALUMINIUM ALLOYS. R VANDZURA, M GELATKO, M HATALA, F BOTKO, S RADCHENKO MM Science Journal, 2024 | | 2024 |
| Electron Beam Welding of Dissimilar Stainless Steel and Maraging Steel Joints M Geľatko, R Vandžura, F Botko, M Hatala Materials 17 (23), 5769, 2024 | | 2024 |
| The Influence of Selected Parameters of Recycled Polyvinyl Butyral on the Sustainable Filament Extrusion Process M Martiček, R Tauberová, J Kaščak, R Vandžura, E Sukić, L Knapčíková Applied Sciences 14 (21), 9752, 2024 | | 2024 |
| Manufacturing and testing of pliers to weld 3D printing filaments J Török, M Kočiško, M Pollák, R Vandžura Journal of Physics: Conference Series 2805 (1), 012006, 2024 | | 2024 |
| Study of Eddy Current Testing Ability on SLM Aluminium Alloy M Geľatko, M Hatala, F Botko, R Vandžura, J Hajnyš Materials 17 (14), 3568, 2024 | | 2024 |
| Residual Stress Evaluation in L-PBF-Produced SS 316L Specimens M Geľatko, M Hatala, F Botko, R Vandžura Materials 17 (10), 2270, 2024 | | 2024 |
| Monitoring the Surface Treatment Effect on the Polyvinyl Butyral Samples in the Context of Industry 4.0 R Tauberová, L Knapčíková, P Lazorík, R Vandžura International Conference on Future Access Enablers of Ubiquitous and …, 2024 | | 2024 |
| Influence of AWJ Process Parameters on Erosion Groove Formation in Additively Manufactured Stainless Steel R Vandžura, V Simkulet, F Botko, M Geľatko, M Hatala Materials 17 (12), 2964, 2024 | | 2024 |
| Conductivity Measurement Verification of Additively Manufactured and Bulk Metals M Geľatko, M Hatala, R Vandžura, M Kasenčák, D Manduľák Design, Simulation, Manufacturing: The Innovation Exchange, 226-237, 2023 | | 2023 |
| Comparison of hand lay-up technology and vacuum bag molding technology to final quality of composite material R Vandzura, V Simkulet, M Hatala, D Duplakova, M Gelatko Machine Modeling and Simulations 2021, 2023 | | 2023 |
