| Application of torsion test for determination of rheological properties of 5019 aluminium alloy KB Laber, A Kawałek, S Sawicki, H Dyja, J Borowski, D Lesniak, ... Key Engineering Materials 682, 356-361, 2016 | 20 | 2016 |
| Analysis of the microstructure evolution during thermo-mechanical treatment of the steel plates in grade X80-X100 M Knapinski, H Dyja, A Kawalek, T Fraczek, K Laber Metalurgija 52 (2), 239-242, 2013 | 20 | 2013 |
| Modelowanie i optymalizacja procesów regulowanego walcowania i kontrolowanego chłodzenia wyrobów walcowni bruzdowych K Laber Praca doktorska, Częstochowa, 8, 2008 | 14 | 2008 |
| Investigation of the non-uniform temperature distribution on the metallic charge length during round bars rolling process P Sygut, K Laber, S Borkowski Manufacturing Technology 12 (13), 260-263, 2012 | 12 | 2012 |
| Investigations of plasticity of hard-deformed aluminium alloys of 5XXX series using torsion plastometer K Laber, A Kawałek, S Sawicki, H Dyja, J Borowski, D Leśniak, H Jurczak Archives of Metallurgy and Materials 61, 2016 | 10 | 2016 |
| Determination of the critical damage for 100Cr6 steel under hot forming conditions Z Pater, J Tomczak, T Bulzak, M Knapiński, S Sawicki, K Laber Engineering Failure Analysis 128, 105588, 2021 | 9 | 2021 |
| Analysis of industrial conditions during multi-stage cooling of C70D high-carbon steel wire rod K Laber, H Dyja, B Koczurkiewicz Materials Testing 57 (4), 301-305, 2015 | 9 | 2015 |
| Physical modelling of plastic deformation conditions for the rolling proces of AZ31 bars in a three high skew rolling mill A Gryc, T Bajor, H Dyja, S Sawicki, K Laber Metalurgija 53 (4), 489-492, 2014 | 8 | 2014 |
| The analysis of Al-Cu bimetallic bars bond layers joined by the explosive method S Wąsek, S Mróz, G Stradomski, KB Laber Solid State Phenomena 199, 508-513, 2013 | 8 | 2013 |
| Analysis of the temperature change over the continuous ingot length on the parameters of round bar rolling process K Laber, S Mróz, P Sygut, H Dyja Metalurgija 52 (1), 39-42, 2013 | 8 | 2013 |
| The effect of the normalizing rolling of S355J2G3 steel round bars on the selected mechanical properties of finished product KB Laber, H Dyja Solid State Phenomena 165, 294-299, 2010 | 8 | 2010 |
| Analysis of the technology of rolling 5, 5 mm-diameter wire rod of cold upsetting steel in the Morgan Block mill K Laber, H Dyja, M Kałamorz Metalurgija 54 (2), 415-418, 2015 | 7 | 2015 |
| Analysis of the effect of the tool shape on the stress and strain distribution in the alternate extrusion and multiaxial compression process H Dyja, M Kwapisz, K Laber, M Knapiński Archives of Metallurgy and Materials, 2011 | 7 | 2011 |
| Analytical and numerical methods of determining the distribution of temperature of air-cooled strip K Laber, H Dyja, D Rydz METALURGIJA-SISAK THEN ZAGREB- 44 (1), 31-36, 2005 | 7 | 2005 |
| Physical modelling of the zirconium alloy tube pilger rolling process H Dyja, A Kawalek, S Sawicki, K Laber, K Ozhmegov METAL 2017-26th International Conference on Metallurgy and Materials …, 2017 | 6 | 2017 |
| Physical modeling of plastic working conditions for rods of 7xxx series aluminum alloys H Dyja, T Bajor, K Laber, E Tussupkaliyeva Archives of Metallurgy and Materials 62 (2A), 515-521, 2017 | 6 | 2017 |
| Plastometric testing of rheological properties of 5083 and 5754 aluminium alloy S Sawicki, A Kawałek, KB Laber, H Dyja, J Borowski, D Lesniak, ... Key Engineering Materials 682, 362-366, 2016 | 6 | 2016 |
| Determination of optimum conditions for the process of controlled cooling of rolled products with diameter 16.5 mm made of 20MnB4 steel K Laber, B Koczurkiewicz Proceedings of the 24th International Conference on Metallurgy and Materials …, 2015 | 6 | 2015 |
| Influence of the cooling conditions after the rolling process on the temperature distribution on the plate cross section K Laber, M Knapiński, H Dyja, A Kawałek Hutnik–Wiadomości Hutnicze 5, 328-331, 2012 | 6 | 2012 |
| Numerical modelling of the cooling ability of device for the plain round bars accelerated cooling process K Laber, H Dyja, M Kwapisz Archives of Metallurgy and Materials 56 (2), 385-392, 2011 | 6 | 2011 |
