Forced convection in a fluid-saturated porous-medium channel with isothermal or isoflux boundaries DA Nield, SLM Junqueira, JL Lage Journal of Fluid Mechanics 322, 201-214, 1996 | 189 | 1996 |
Turbulent flow in d-type corrugated pipes: flow pattern and friction factor H Stel, AT Franco, SLM Junqueira, RH Erthal, R Mendes, MAL Gonçalves, ... Journal of fluids engineering 134 (12), 121202, 2012 | 39 | 2012 |
Numerical and experimental analysis of turbulent flow in corrugated pipes H Stel, REM Morales, AT Franco, SLM Junqueira, RH Erthal, ... | 38 | 2010 |
Numerical simulation of the heat transfer in fully developed horizontal two-phase slug flows using a slug tracking method CDP Medina, CL Bassani, C Cozin, FAA Barbuto, SLM Junqueira, ... International Journal of Thermal Sciences 88, 258-266, 2015 | 19 | 2015 |
Natural convection and surface radiation in a heated wall, C-shaped fracture A Lugarini, AT Franco, SLM Junqueira, JL Lage Journal of Heat Transfer 140 (8), 082501, 2018 | 18 | 2018 |
Numerical investigation of natural convection in heterogeneous rectangular enclosures SLM Junqueira, FC De Lai, AT Franco, JL Lage Heat transfer engineering 34 (5-6), 460-469, 2013 | 17 | 2013 |
Numerical Evaluation of CFD‐DEM Coupling Applied to Lost Circulation Control: Effects of Particle and Flow Inertia MV Barbosa, FC De Lai, SLM Junqueira Mathematical Problems in Engineering 2019 (1), 6742371, 2019 | 14 | 2019 |
Aspect ratio effect on the prediction of boundary layer interference in steady natural convection inside heterogeneous enclosures JL Lage, SLM Junqueira, FC De Lai, AT Franco International Journal of Heat and Mass Transfer 92, 940-947, 2016 | 14 | 2016 |
Natural convection of a viscoplastic fluid in an enclosure filled with solid obstacles PRM Santos, A Lugarini, SLM Junqueira, AT Franco International Journal of Thermal Sciences 166, 106991, 2021 | 13 | 2021 |
CFD–DEM simulation of mud cake formation in heterogeneous porous medium for lost circulation control VG Poletto, FC De Lai, SLM Junqueira Journal of the Brazilian Society of Mechanical Sciences and Engineering 42 …, 2020 | 13 | 2020 |
Predicting the nusselt number of heterogeneous (porous) enclosures using a generic form of the berkovsky–polevikov correlations H Qiu, JL Lage, SLM Junqueira, AT Franco Journal of heat transfer 135 (8), 082601, 2013 | 12 | 2013 |
The effects of discrete conductive blocks on the natural convection in side-heated open cavities AT Franco, PRM Santos, A Lugarini, LT Loyola, FC De Lai, ... Applied Thermal Engineering 219, 119613, 2023 | 11 | 2023 |
Numerical simulation of turbulent flow in corrugated pipes HS Azevedo, REM Morales, AT Franco, SLM Junqueira, RH Erthal, ... | 9 | 2008 |
On determining the power-law fluid friction factor in a partially porous channel using the lattice Boltzmann method RECP Meira, FC De Lai, COR Negrão, SLM Junqueira Physics of Fluids 32 (9), 2020 | 8 | 2020 |
A steady-state approach for evaluation of surge and swab pressures in flows with free surface boundary conditions A Wolski, SLM Junqueira, COR Negrão Journal of Petroleum Science and Engineering 122, 208-215, 2014 | 8 | 2014 |
Hydrodynamics and heat transfer simulation for two-phase intermittent flow in horizontal pipes CDP Medina, C Cozin, REM Morales, SLM Junqueira 13th Braz. Congr. of Therm. Sci. and Eng. Uberlândia, Brazil, 2010 | 8 | 2010 |
Effect of LCM and polymeric additives on mudcake and filtrate rheology parameters G de Souza Fritoli, FC De Lai, SL de Mello Junqueira Journal of Petroleum Science and Engineering 205, 108948, 2021 | 6 | 2021 |
Boundary effects on the tortuosity and permeability of idealized porous media RLM Bazarin, FC De Lai, C Naaktgeboren, SLM Junqueira Transport in Porous Media 136 (3), 743-764, 2021 | 6 | 2021 |
Experimental Analysis of Turbulent Flow in Flexible Pipes REM Morales, AT Franco, SLM Junqueira, RH Erthal Technical Report-UTFPR/CENPES-PETROBRAS, Curitiba, 2007 | 6 | 2007 |
Transient Model for Surge and Swab Pressures in Well Drilling F Almeida, TB Matos, COR Negrão, SLM Junqueira, AL Martins 20th International Congress of Mechanical Engineering, 15-20, 2009 | 5 | 2009 |