| A universal scaling law for the strength of metal micropillars and nanowires R Dou, B Derby Scripta Materialia 61 (5), 524-527, 2009 | 171 | 2009 |
| The fabrication of SiBCN ceramic components from preceramic polymers by digital light processing (DLP) 3D printing technology S Li, W Duan, T Zhao, W Han, L Wang, R Dou, G Wang Journal of the European Ceramic Society 38 (14), 4597-4603, 2018 | 145 | 2018 |
| Superstretchable and processable silicone elastomers by digital light processing 3D printing T Zhao, R Yu, S Li, X Li, Y Zhang, X Yang, X Zhao, C Wang, Z Liu, R Dou, ... ACS applied materials & interfaces 11 (15), 14391-14398, 2019 | 117 | 2019 |
| Ink‐jet printing of zirconia: coffee staining and line stability R Dou, T Wang, Y Guo, B Derby Journal of the American Ceramic Society 94 (11), 3787-3792, 2011 | 106 | 2011 |
| Formation of coffee stains on porous surfaces R Dou, B Derby Langmuir 28 (12), 5331-5338, 2012 | 81 | 2012 |
| Digital light processing of lunar regolith structures with high mechanical properties M Liu, W Tang, W Duan, S Li, R Dou, G Wang, B Liu, L Wang Ceramics International 45 (5), 5829-5836, 2019 | 72 | 2019 |
| The strength of gold nanowire forests R Dou, B Derby Scripta materialia 59 (2), 151-154, 2008 | 71 | 2008 |
| Deformation mechanisms in gold nanowires and nanoporous gold R Dou, B Derby Philosophical Magazine 91 (7-9), 1070-1083, 2011 | 66 | 2011 |
| Additive manufacturing of SiBCN/Si 3 N 4 w composites from preceramic polymers by digital light processing S Li, Y Zhang, T Zhao, W Han, W Duan, L Wang, R Dou, G Wang RSC advances 10 (10), 5681-5689, 2020 | 44 | 2020 |
| Partially stabilized zirconia moulds fabricated by stereolithographic additive manufacturing via digital light processing L Wang, X Liu, G Wang, W Tang, S Li, W Duan, R Dou Materials Science and Engineering: A 770, 138537, 2020 | 43 | 2020 |
| Thermal conductivities and mechanical properties of AlN ceramics fabricated by three dimensional printing W Duan, S Li, G Wang, R Dou, L Wang, Y Zhang, H Li, H Tan Journal of the European Ceramic Society 40 (10), 3535-3540, 2020 | 42 | 2020 |
| Sintering of lunar regolith structures fabricated via digital light processing R Dou, WZ Tang, L Wang, S Li, WY Duan, M Liu, YB Zhang, G Wang Ceramics International 45 (14), 17210-17215, 2019 | 41 | 2019 |
| High-strength nanoporous silver produced by inkjet printing R Dou, B Xu, B Derby Scripta Materialia 63 (3), 308-311, 2010 | 39 | 2010 |
| High throughput cryopreservation of cells by rapid freezing of sub-μl drops using inkjet printing–cryoprinting R Dou, RE Saunders, L Mohamet, CM Ward, B Derby Lab on a Chip 15 (17), 3503-3513, 2015 | 31 | 2015 |
| Ceramic paste for space stereolithography 3D printing technology in microgravity environment R Dou, W Tang, K Hu, L Wang Journal of the European Ceramic Society 42 (9), 3968-3975, 2022 | 27 | 2022 |
| Additive manufacturing of low-shrinkage alumina cores for single-crystal nickel-based superalloy turbine blade casting W Tang, T Zhao, R Dou, L Wang Ceramics International 48 (11), 15218-15226, 2022 | 24 | 2022 |
| Strain gradients and the strength of nanoporous gold R Dou, B Derby Journal of Materials Research 25 (4), 746-753, 2010 | 23 | 2010 |
| Characterisation of microstructure and hardness of perovskite-structured Ba0. 5Sr0. 5Co0. 8Fe0. 2O3− δ under different sintering conditions L Wang, R Dou, M Bai, Y Li, D Hall, Y Chen Journal of the European Ceramic Society 36 (7), 1659-1667, 2016 | 21 | 2016 |
| Influence of sintering temperature and CVI time on mechanical properties of 3D-printed alumina ceramics H Li, Y Liu, Y Liu, Q Zeng, Y Gu, W Duan, R Dou, J Liang, J Li Materials Letters 285, 129096, 2021 | 19 | 2021 |
| Fabrication of highly translucent yttria-stabilized zirconia ceramics using stereolithography-based additive manufacturing L Wang, H Yu, Z Hao, W Tang, R Dou Ceramics International 49 (11), 17174-17184, 2023 | 16 | 2023 |
Brian DerbyProfessor of Materials Science, University of Manchester在 manchester.ac.uk 的电子邮件经过验证
