Precipitates and intermetallic phases in precipitation hardening Al–Cu–Mg–(Li) based alloys SC Wang, MJ Starink International Materials Reviews 50 (4), 193-215, 2005 | 962 | 2005 |
A model for the yield strength of overaged Al–Zn–Mg–Cu alloys MJ Starink, SC Wang Acta Materialia 51 (17), 5131-5150, 2003 | 499 | 2003 |
Two types of S phase precipitates in Al–Cu–Mg alloys SC Wang, MJ Starink Acta Materialia 55 (3), 933-941, 2007 | 384 | 2007 |
Precipitation hardening in Al–Cu–Mg alloys revisited SC Wang, MJ Starink, N Gao Scripta Materialia 54 (2), 287-291, 2006 | 338 | 2006 |
Effect of self-accommodation on α/α boundary populations in pure titanium SC Wang, M Aindow, MJ Starink Acta materialia 51 (9), 2485-2503, 2003 | 329 | 2003 |
The study of aluminium anodes for high power density Al/air batteries with brine electrolytes M Nestoridi, D Pletcher, RJK Wood, S Wang, RL Jones, KR Stokes, ... Journal of Power Sources 178 (1), 445-455, 2008 | 239 | 2008 |
The thermodynamics of and strengthening due to co-clusters: general theory and application to the case of Al–Cu–Mg alloys MJ Starink, SC Wang Acta Materialia 57 (8), 2376-2389, 2009 | 200 | 2009 |
The strength of friction stir welded and friction stir processed aluminium alloys MJ Starink, A Deschamps, SC Wang Scripta materialia 58 (5), 377-382, 2008 | 190 | 2008 |
The electrodeposition of composite coatings: Diversity, applications and challenges FC Walsh, S Wang, N Zhou Current Opinion in Electrochemistry 20, 8-19, 2020 | 173 | 2020 |
Estimation of dislocation densities in cold rolled Al‐Mg‐Cu‐Mn alloys by combination of yield strength data, EBSD and strength models SC Wang, Z Zhu, MJ Starink Journal of microscopy 217 (2), 174-178, 2005 | 146 | 2005 |
Fabrication of CrAlN nanocomposite films with high hardness and excellent anti-wear performance for gear application L Wang, G Zhang, RJK Wood, SC Wang, Q Xue Surface and Coatings Technology 204 (21-22), 3517-3524, 2010 | 128 | 2010 |
Self-lubricating Ni-P-MoS2 composite coatings Y He, SC Wang, FC Walsh, YL Chiu, PAS Reed Surface and Coatings Technology 307, 926-934, 2016 | 126 | 2016 |
The assessment of GPB2/S′′ structures in Al–Cu–Mg alloys SC Wang, MJ Starink Materials Science and Engineering: A 386 (1-2), 156-163, 2004 | 122 | 2004 |
Improved tribological behavior of DLC films under water lubrication by surface texturing Q Ding, L Wang, Y Wang, SC Wang, L Hu, Q Xue Tribology letters 41, 439-449, 2011 | 120 | 2011 |
Hardening of an Al–Cu–Mg alloy containing Types I and II S phase precipitates TS Parel, SC Wang, MJ Starink Materials & Design 31, S2-S5, 2010 | 117 | 2010 |
Quench sensitivity of toughness in an Al alloy: Direct observation and analysis of failure initiation at the precipitate-free zone TF Morgeneyer, MJ Starink, SC Wang, I Sinclair Acta Materialia 56 (12), 2872-2884, 2008 | 113 | 2008 |
Preparation and performance of a novel multifunctional plasma electrolytic oxidation composite coating formed on magnesium alloy J Guo, L Wang, SC Wang, J Liang, Q Xue, F Yan Journal of materials science 44 (8), 1998-2006, 2009 | 110 | 2009 |
Microhardness and corrosion properties of hypoeutectic Al–7Si alloy processed by high-pressure torsion X Wang, M Nie, CT Wang, SC Wang, N Gao Materials & Design 83, 193-202, 2015 | 95 | 2015 |
Scalable high-mobility MoS 2 thin films fabricated by an atmospheric pressure chemical vapor deposition process at ambient temperature CC Huang, F Al-Saab, Y Wang, JY Ou, JC Walker, S Wang, B Gholipour, ... Nanoscale 6 (21), 12792-12797, 2014 | 95 | 2014 |
Influence of microstructure on the erosion and erosion–corrosion characteristics of 316 stainless steel RJK Wood, JC Walker, TJ Harvey, S Wang, SS Rajahram Wear 306 (1-2), 254-262, 2013 | 95 | 2013 |