| Single phase flow pressure drop and heat transfer in rectangular metallic microchannels AM Sahar, MR Özdemir, EM Fayyadh, J Wissink, MM Mahmoud, ... Applied Thermal Engineering 93, 1324-1336, 2016 | 110 | 2016 |
| Flow boiling of water in a rectangular metallic microchannel MR Özdemir, MM Mahmoud, TG Karayiannis Heat Transfer Engineering 42 (6), 492-516, 2021 | 52 | 2021 |
| High mass flux flow boiling and critical heat flux in microscale A Kaya, MR Özdemir, A Koşar International Journal of Thermal Sciences 65, 70-78, 2013 | 48 | 2013 |
| Parametric study on the effect of end walls on heat transfer and fluid flow across a micro pin-fin M Koz, MR Ozdemir, A Koşar International Journal of Thermal Sciences 50 (6), 1073-1084, 2011 | 48 | 2011 |
| Pressure drop across micro-pin heat sinks under unstable boiling conditions A Koşar, MR Özdemir, M Keskinoz International Journal of Thermal Sciences 49 (7), 1253-1263, 2010 | 37 | 2010 |
| Experimental studies on ferrofluid pool boiling in the presence of external magnetic force MR Özdemir, AK Sadaghiani, AR Motezakker, SS Parapari, HS Park, ... Applied Thermal Engineering, 2018 | 31 | 2018 |
| The effects of inlet restriction and tube size on boiling instabilities and detection of resulting premature critical heat flux in microtubes using data analysis A Kaya, MR Özdemir, M Keskinöz, A Koşar Applied thermal engineering 65 (1-2), 575-587, 2014 | 29 | 2014 |
| Pool boiling heat transfer of ferrofluids on structured hydrophilic and hydrophobic surfaces: The effect of magnetic field AK Sadaghiani, H Rajabnia, S Çelik, H Noh, HJ Kwak, M Nejatpour, ... International Journal of Thermal Sciences 155, 106420, 2020 | 23 | 2020 |
| Influence of piston bowl geometry on combustion and emission characteristics R Şener, MR Özdemir, MU Yangaz Proceedings of the Institution of Mechanical Engineers, Part A: Journal of …, 2019 | 20 | 2019 |
| FLOW BOILING HEAT TRANSFER IN A RECTANGULAR COPPER MICROCHANNEL TG Özdemir, Mehmed R, Mohamed, Mahmoud M,KARAYIANNIS Journal of Thermal Engineering 2 (2), 761-773, 2016 | 18* | 2016 |
| EFFECT OF THE GEOMETRICAL PARAMETERS IN A DOMESTIC BURNER WITH CRESCENT FLAME CHANNELS FOR AN OPTIMAL TEMPERATURE DISTRIBUTION AND THERMAL EFFICIENCY R Şener, MR Özdemir, MU Yangaz Journal of Thermal Engineering 5 (6), 171-183, 2019 | 15 | 2019 |
| A REVIEW OF SINGLE-PHASE AND TWO-PHASE PRESSURE DROP CHARACTERISTICS AND FLOW BOILING INSTABILITIES IN MICROCHANNELS MR Özdemir, ÖR Sözbir Journal of Thermal Engineering 4 (6), 2451-2463, 2018 | 15 | 2018 |
| Single-phase flow and flow boiling of water in rectangular metallic microchannels MR Özdemir Brunel University London, 2016 | 15 | 2016 |
| Combustion performance of hydrogen-enriched fuels in a premixed burner MU Yangaz, MR Özdemir, R Şener Environmental technology 41 (1), 2-13, 2020 | 13 | 2020 |
| Low mass quality flow boiling in microtubes at high mass fluxes MR Özdemir, A Kaya, A Koşar Journal of Thermal Science and Engineering Applications 3 (4), 1-10, 2011 | 12 | 2011 |
| Design and implementation of minichannel evaporator for electronics cooling MH Sökücü, MR Özdemir Journal of Thermal Analysis and Calorimetry 143 (5), 3761-3773, 2021 | 7 | 2021 |
| Energy, exergy and exergo-economic characteristics of hydrogen enriched hydrocarbon-based fuels in a premixed burner MR Özdemir, MU Yangaz, IT Yilmaz Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 43 …, 2021 | 6 | 2021 |
| Thermally developing single-phase flows in microtubes MR Özdemir, A Koşar Journal of heat transfer 135 (7), 074502, 2013 | 6 | 2013 |
| Thermal Hydraulic, Exergy and Exergy-Economic Analysis of Micro Heat Sinks at High Flow Rates MR Özdemir, A Koşar, O Demir, C Özenel, O Bahçıvan ASME 2010 10th Biennial Conference on Engineering Systems Design and …, 2010 | 5 | 2010 |
| Pressure drop across micro-pin heat sinks under boiling conditions A Koşar, MR Özdemir, M Keskinöz ECI, 2009 | 5 | 2009 |
Ali KosarProfessor, Mechatronics/Mechanical Engineering,Sabanci University, Istanbul, TURKEY在 sabanciuniv.edu 的电子邮件经过验证
