| Planar slip-driven fatigue crack initiation and propagation in an equiatomic CrMnFeCoNi high-entropy alloy K Suzuki, M Koyama, S Hamada, K Tsuzaki, H Noguchi International Journal of Fatigue 133, 105418, 2020 | 67 | 2020 |
| Qualification of chromium–molybdenum steel based on the safety factor multiplier method in CHMC1-2014 J Yamabe, H Matsunaga, Y Furuya, S Hamada, H Itoga, M Yoshikawa, ... International Journal of Hydrogen Energy 40 (1), 719-728, 2015 | 55 | 2015 |
| A NEW METHOD FOR THE MEASUREMENT OF MODE II FATIGUE THRESHOLD STRESS INTENSITY FACTOR RANGE ΔKτth Y Murakami, S Hamada Fatigue & Fracture of Engineering Materials & Structures 20 (6), 863-870, 1997 | 51 | 1997 |
| Strain mapping with high spatial resolution across a wide observation range by digital image correlation on plastic replicas S Hamada, T Fujisawa, M Koyama, N Koga, N Nakada, T Tsuchiyama, ... Materials characterization 98, 140-146, 2014 | 36 | 2014 |
| Various strength properties of SCM435 and SNCM439 low-alloy steels in 115 MPa hydrogen gas and proposal of design guideline S Matsuoka, H Matsunaga, J Yamabe, S Hamada, T Iijima Transactions of the JSME (in Japanese) 83 (854), 17-00264, 2017 | 33 | 2017 |
| Fatigue crack growth behavior of JIS SCM440 steel near fatigue threshold in 9-MPa hydrogen gas environment K Tazoe, S Hamada, H Noguchi International Journal of Hydrogen Energy 42 (18), 13158-13170, 2017 | 31 | 2017 |
| Mechanical examination of crack length dependency and material dependency on threshold stress intensity factor range with Dugdale model N Fukumura, T Suzuki, S Hamada, K Tsuzaki, H Noguchi Engineering Fracture Mechanics 135, 168-186, 2015 | 30 | 2015 |
| Measurement of mode II threshold stress intensity factor range ΔKIIth Y Murakami, T Fukuhara, S Hamada Zairyo/Journal of the Society of Materials Science, Japan 51 (8), 918-925, 2002 | 29 | 2002 |
| Proposal of method for estimation stress intensity factor range on small crack for light metals H Noguchi, K Morishige, T Fujii, T Kawazoe, S Hamada Proc. 56th JSMS annual meetings, 197-138, 2007 | 28 | 2007 |
| Fatigue limit evaluation considering crack initiation for lamellar pearlitic steel S Hamada, D Sasaki, M Ueda, H Noguchi Procedia Engineering 10, 1467-1472, 2011 | 26 | 2011 |
| Fatigue crack propagation modes: plastic deformation mode and damage accumulation mode S Hamada, K Zhang, M Koyama, M Ueda, H Noguchi International Journal of Fracture 222 (1), 111-122, 2020 | 18 | 2020 |
| Weakest region analysis of non-combustible Mg products fabricated by selective laser melting B Proano, H Miyahara, T Matsumoto, S Hamada, H Sakai, K Ogawa, ... Theoretical and Applied Fracture Mechanics 103, 102291, 2019 | 18 | 2019 |
| Pre-strain effect on fatigue strength characteristics of SUH660 plain specimens H Wu, S Hamada, H Noguchi International journal of fatigue 55, 291-298, 2013 | 17 | 2013 |
| Fatigue strength properties of precipitation strengthening stainless steel A286 focused attention on small fatigue crack behaviour H Wu, Y Oshida, S Hamada, H Noguchi Procedia Engineering 10, 1973-1978, 2011 | 16 | 2011 |
| Tensile properties of precracked tempered martensitic steel specimens tested at ultralow strain rates in high-pressure hydrogen atmosphere D Sasaki, M Koyama, S Hamada, H Noguchi Philosophical Magazine Letters 95 (5), 260-268, 2015 | 15 | 2015 |
| Engineering definitions of small crack and long crack at fatigue limit under tensile mean stress and a prediction method for determining the fatigue limit of a cracked Mg alloy S Hamada, T Kinoshita, K Morishige, K Hayashi, T Ishina, H Noguchi International journal of fatigue 56, 86-94, 2013 | 14 | 2013 |
| Fatigue strength prediction for inhomogeneous face-centered cubic metal based on Vickers hardness H Wu, S Hamada, H Noguchi International journal of fatigue 48, 48-54, 2013 | 14 | 2013 |
| Threshold stress intensity factor range of a mechanically-long and microstructually-short crack perpendicular to an interface with plastic mismatch B Li, M Koyama, S Hamada, H Noguchi Engineering Fracture Mechanics 182, 287-302, 2017 | 13 | 2017 |
| Fatigue strength characteristics evaluation of SUH660 considering small fatigue crack propagation behavior and hardness distribution H Wu, S Hamada, H Noguchi International journal of fatigue 63, 1-11, 2014 | 13 | 2014 |
| Mode I fatigue crack growth induced by strain-aging in precipitation-hardened aluminum alloys SF Anis, M Koyama, S Hamada, H Noguchi Theoretical and Applied Fracture Mechanics 104, 102340, 2019 | 12 | 2019 |
Motomichi KoyamaTohoku University, IMR在 imr.tohoku.ac.jp 的电子邮件经过验证
