| Machining damage in FRPs: laser versus conventional drilling A Hejjaji, D Singh, S Kubher, D Kalyanasundaram, S Gururaja Composites Part A: Applied Science and Manufacturing 82, 42-52, 2016 | 110 | 2016 |
| A critical review on the properties of intermetallic compounds and their application in the modern manufacturing AR Paul, M Mukherjee, D Singh Crystal research and technology 57 (3), 2100159, 2022 | 35 | 2022 |
| Experimental assessment of biomechanical properties in human male elbow bone subjected to bending and compression loads D Singh, A Rana, SK Jhajhria, B Garg, PM Pandey, D Kalyanasundaram Journal of Applied Biomaterials and Functional Materials, 2018 | 32 | 2018 |
| Machinability analysis of nickel-based superalloy Nimonic 90: a comparison between wet and LCO2 as a cryogenic coolant T Patel, N Khanna, S Yadav, P Shah, M Sarikaya, D Singh, MK Gupta, ... The International Journal of Advanced Manufacturing Technology 113, 3613-3628, 2021 | 29 | 2021 |
| Open hole fatigue testing of laser machined MD-CFRPs D Kalyanasundaram, S Gururaja, P Prabhune, D Singh Composites Part A: Applied Science and Manufacturing 111, 33-41, 2018 | 28 | 2018 |
| Optimization of pressure-less microwave sintering of Ti6Al4V by response surface methodology D Singh, PM Pandey, D Kalyanasundaram Materials and Manufacturing processes, 2018 | 28 | 2018 |
| Investigation of the mechanical performance of carbon/polypropylene 2D and 3D woven composites manufactured through multi-step impregnation processes V Goud, D Singh, A Ramasamy, A Das, D Kalyanasundaram Composites Part A: Applied Science and Manufacturing 130, 105733, 2020 | 25 | 2020 |
| Laser machining of Kevlar fiber reinforced laminates–effect of polyetherimide versus polypropylene matrix H Chouhan, D Singh, V Parmar, D Kalyanasundaram, N Bhatnagar Composites Science and Technology 134, 267-274, 2016 | 25 | 2016 |
| Microwave Sintering of Ti6Al4V: Optimization of Processing Parameters for Maximal Tensile Strength and Minimal Pore Size D Singh, A Rana, P Sharma, PM Pandey, D Kalyanasundaram Metals 8 (12), 1-13, 2018 | 11 | 2018 |
| Design and development of 3D printing assisted microwave sintering of elbow implant with biomechanical properties similar to human elbow D Singh, B Garg, PM Pandey, D Kalyanasundaram Rapid Prototyping Journal 28 (2), 390-403, 2022 | 7 | 2022 |
| Influence of hygrothermal ageing on the novel infusible thermoplastic resin reinforced with quadriaxial non-crimp glass fabrics AK Bandaru, S Hickey, D Singh, R Gujjala, S Pichandi Journal of Thermoplastic Composite Materials 36 (10), 3813-3836, 2023 | 4 | 2023 |
| Stainless Steel to Aluminium Joining by Interfacial doping with Al2O3 powder in Wire Arc Direct Energy Deposition Process AR Paul, M Mukherjee, D Singh Materials Letters, 2022 | 4 | 2022 |
| A cadaveric study on the rate of strain dependent behaviour of human anterior cruciate ligament M Marieswaran, A Sikidar, A Rana, D Singh, N Mansoori, S Lalwani, ... Acta of Bioengineering and Biomechanics 23 (1), 2021 | 4 | 2021 |
| Interfacial characterization of additively manufactured stainless steel to aluminium thin wall with nickel interlayer AR Paul, M Mukherjee, D Singh, MK Mondal Journal of Materials Research, 2022 | 1 | 2022 |
| Mechanical properties of the human elbow bones measured by nanoindentation and microindentation D Singh, PM Pandey, D Kalyanasundaram ASME's International Mechanical Engineering Congress and Exposition …, 2018 | 1 | 2018 |
| Review of plasma arc cutting process and its comparative analysis with laser beam machining process in terms of energy consumption P Sawdatkar, V Parmar, D Singh Materials and Manufacturing Processes, 1–24., 2024 | | 2024 |
| Review of current challenges in the implementation of WAAM for Ti-6Al-4V alloys S Yadav, M Mukherjee, D Singh The International Journal of Advanced Manufacturing Technology, 2024 | | 2024 |
| Development of water recycling based mechanical drain cleaning system AR Paul, SA Babalola, AK Yadav, M Mukherjee, D Singh Water Practice & Technology 19 (5), 2045-2059, 2024 | | 2024 |
| Alveolar Distraction Device K Dinesh, M Divya, S Dilpreet IN Patent 440,561, 2023 | | 2023 |
| Elbow Implant K Dinesh, S Dilpreet, P Pulak Mohan IN Patent 438,849, 2023 | | 2023 |
