关注
Donald A. Klosterman
Donald A. Klosterman
Associate Professor, University of Dayton
在 udayton.edu 的电子邮件经过验证
标题
引用次数
引用次数
年份
Interfacial characteristics of composites fabricated by laminated object manufacturing
D Klosterman, R Chartoff, G Graves, N Osborne, B Priore
Composites Part A: Applied Science and Manufacturing 29 (9-10), 1165-1174, 1998
1891998
Development of a curved layer LOM process for monolithic ceramics and ceramic matrix composites
DA Klosterman, RP Chartoff, NR Osborne, GA Graves, A Lightman, G Han, ...
Rapid Prototyping Journal 5 (2), 61-71, 1999
1391999
Rapid Prototyping
DL Bourell, JJ Beaman Jr, D Klosterman, I Gibson, A Bandyopadhyay
ASM Handbook 21, 383-7, 2001
992001
Evaluating fiber–matrix interaction in polymer–matrix composites by inverse gas chromatography
RT Pogue, J Ye, DA Klosterman, AS Glass, RP Chartoff
Composites Part A: Applied Science and Manufacturing 29 (9-10), 1273-1281, 1998
731998
Effect of filler dispersion on the electromechanical response of epoxy/vapor-grown carbon nanofiber composites
A Ferreira, P Cardoso, D Klosterman, JA Covas, FWJ Van Hattum, F Vaz, ...
Smart materials and structures 21 (7), 075008, 2012
502012
Direct fabrication of ceramics, CMCs by rapid prototyping
D Klosterman, R Chartoff, N Osborne, G Graves, A Lightman, G Han, ...
American ceramic society bulletin 77 (10), 69-74, 1998
401998
Automated Fabrication of Monolithic and Ceramic Matrix Composites via Laminated Object Manufacturing (LOM)
D Klosterman, R Chartoff, N Osborne, G Graves
1997 International Solid Freeform Fabrication Symposium, 1997
40*1997
Electron-induced cutting of single-walled carbon nanotubes
U Rauwald, J Shaver, DA Klosterman, Z Chen, C Silvera-Batista, ...
Carbon 47 (1), 178-185, 2009
382009
Laminated object manufacturing, a new process for the direct manufacture of monolithic ceramics and continuous fiber CMCs
D Klosterman, R Chartoff, N Osborne, G Graves
Proceedings of the 21st Annual Conference on Composites, Advanced Ceramics …, 1997
381997
Curved Layer LOM of Ceramics and Composites
D Klosterman, R Chartoff, N Osborne, G Graves, A Lightman, G Han, ...
Prototyping Technology International '98, (Annual Review Book), 145-149, 1998
371998
The role of disorder on the AC and DC electrical conductivity of vapour grown carbon nanofibre/epoxy composites
P Cardoso, J Silva, D Klosterman, JA Covas, FWJ Van Hattum, R Simões, ...
Composites Science and Technology 72 (2), 243-247, 2012
352012
Functionalization of carbon nanofibers through electron beam irradiation
MC Evora, D Klosterman, K Lafdi, L Li, JL Abot
Carbon 48 (7), 2037-2046, 2010
352010
Automated fabrication of custom bone implants using rapid prototyping
C Steidle, D Klosterman, R Chartoff, G Graves, N Osborne
44 th International SAMPE Symposium and Exhibition, 1866-1877, 1999
351999
Solid freeform fabrication of functional silicon nitride ceramics by laminated object manufacturing
SJ Rodrigues, RP Chartoff, DA Klosterman, M Agarwala, N Hecht
Proceedings from Solid Freeform Fabrication Symposium, 2000
342000
Structural Composites via Laminated Object Manufacturing (LOM)
DA Klosterman, RP Chartoff, B Priore, N Osborne, G Graves, A Lightman, ...
1996 International Solid Freeform Fabrication Symposium, 1996
331996
Laminated Object Manufacturing (LOM) of advanced ceramics and composites
D Klosterman, R Chartoff, N Osborne, G Graves, A Lightman, G Han
Proc. of the 7th International Conference on RP, University of Dayton and …, 1997
301997
The influence of the dispersion method on the electrical properties of vapor-grown carbon nanofiber/epoxy composites
P Cardoso, J Silva, D Klosterman, JA Covas, FWJ van Hattum, R Simoes, ...
Nanoscale research letters 6, 1-5, 2011
272011
Laminated object manufacturing of polymer matrix composites
D Klosterman, B Priore, R Chartoff
Proceedings of the Seventh International Conference on Rapid Prototyping …, 1997
251997
Simulation of laminated object manufacturing (LOM) with variation of process parameters
L Flach, MA Jacobs, DA Klosterman, RP Chartoff
1998 International Solid Freeform Fabrication Symposium, 1998
231998
Affordable, rapid composite tooling via laminated object manufacturing
D Klosterman, R Chartoff, S Pak
Proceedings of the 41st International SAMPE Symposium and Exhibition, 220-229, 1996
231996
系统目前无法执行此操作,请稍后再试。
文章 1–20