| Permeability of unidirectional reinforcements for RTM BR Gebart Journal of composite materials 26 (8), 1100-1133, 1992 | 1222 | 1992 |
| Influence from process parameters on void formation in resin transfer molding TS Lundström, BR Gebart Polymer Composites 15 (1), 25-33, 1994 | 266 | 1994 |
| Analysis of the vacuum infusion molding process A Hammami, BR Gebart Polymer composites 21 (1), 28-40, 2000 | 221 | 2000 |
| Void formation in RTM TS Lundstrom, BR Gebart, CY Lundemo Journal of reinforced plastics and composites 12 (12), 1339-1349, 1993 | 182 | 1993 |
| Measurement of in‐plane permeability of anisotropic fiber reinforcements BR Gebart, P Lidström Polymer composites 17 (1), 43-51, 1996 | 167 | 1996 |
| Influence of fuel ash composition on high temperature aerosol formation in fixed bed combustion of woody biomass pellets H Wiinikka, R Gebart, C Boman, D Boström, M Öhman Fuel 86 (1-2), 181-193, 2007 | 144 | 2007 |
| Pressurized oxygen blown entrained-flow gasification of wood powder F Weiland, H Hedman, M Marklund, H Wiinikka, O Ohrman, R Gebart Energy & Fuels 27 (2), 932-941, 2013 | 133 | 2013 |
| Effect of perturbation of fibre architecture on permeability inside fibre tows TS Lundström, BR Gebart Journal of composite materials 29 (4), 424-443, 1995 | 107 | 1995 |
| High-temperature aerosol formation in wood pellets flames: Spatially resolved measurements H Wiinikka, R Gebart, C Boman, D Boström, A Nordin, M Öhman Combustion and Flame 147 (4), 278-293, 2006 | 98 | 2006 |
| Critical parameters for particle emissions in small-scale fixed-bed combustion of wood pellets H Wiinikka, R Gebart Energy & fuels 18 (4), 897-907, 2004 | 98 | 2004 |
| Influence of process parameters on the performance of an oxygen blown entrained flow biomass gasifier F Weiland, H Wiinikka, H Hedman, J Wennebro, E Pettersson, R Gebart Fuel 153, 510-519, 2015 | 89 | 2015 |
| Two years experience of the BioDME project—a complete wood to wheel concept I Landälv, R Gebart, B Marke, F Granberg, E Furusjö, P Löwnertz, ... Environmental Progress & Sustainable Energy 33 (3), 744-750, 2014 | 87 | 2014 |
| Experimental investigation of an industrial scale black liquor gasifier. 1. The effect of reactor operation parameters on product gas composition P Carlsson, H Wiinikka, M Marklund, C Grönberg, E Pettersson, M Lidman, ... Fuel 89 (12), 4025-4034, 2010 | 87 | 2010 |
| In‐plane permeability measurements on fiber reinforcements by the multi‐cavity parallel flow technique TS Lundström, BR Gebart, E Sandlund Polymer Composites 20 (1), 146-154, 1999 | 86 | 1999 |
| The influence of air distribution rate on particle emissions in fixed bed combustion of biomass H Wiinikka, R Gebart Combustion Science and Technology 177 (9), 1747-1766, 2005 | 69 | 2005 |
| Performance of a pilot-scale entrained-flow black liquor gasifier Y Jafri, E Furusjö, K Kirtania, R Gebart Energy & Fuels 30 (4), 3175-3185, 2016 | 61 | 2016 |
| Experimental investigations of the influence from different operating conditions on the particle emissions from a small-scale pellets combustor H Wiinikka, R Gebart Biomass and Bioenergy 27 (6), 645-652, 2004 | 58 | 2004 |
| Numerical model for vacuum infusion manufacturing of polymer composites H Magnus Andersson, T Staffan Lundström, B Rikard Gebart International Journal of Numerical Methods for Heat & Fluid Flow 13 (3), 383-394, 2003 | 54 | 2003 |
| CFD modelling of black liquor gasification: Identification of important model parameters M Marklund, R Tegman, R Gebart Fuel 86 (12-13), 1918-1926, 2007 | 51 | 2007 |
| The influence of fuel type on particle emissions in combustion of biomass pellets H Wiinikka, R Gebart Combustion Science and Technology 177 (4), 741-763, 2005 | 51 | 2005 |
T. Staffan LundströmSweden在 ltu.se 的电子邮件经过验证
