Fluid dynamics wind turbine design: Critical analysis, optimization and application of BEM theory R Lanzafame, M Messina Renewable energy 32 (14), 2291-2305, 2007 | 356 | 2007 |
2D CFD modeling of H-Darrieus wind turbines using a transition turbulence model R Lanzafame, S Mauro, M Messina Energy Procedia 45, 131-140, 2014 | 317 | 2014 |
Design of a vertical-axis wind turbine: how the aspect ratio affects the turbine’s performance S Brusca, R Lanzafame, M Messina International Journal of Energy and Environmental Engineering 5, 333-340, 2014 | 280 | 2014 |
Wind turbine CFD modeling using a correlation-based transitional model R Lanzafame, S Mauro, M Messina Renewable Energy 52, 31-39, 2013 | 272 | 2013 |
A low-cost lightweight climbing robot for the inspection of vertical surfaces G La Rosa, M Messina, G Muscato, R Sinatra Mechatronics 12 (1), 71-96, 2002 | 211 | 2002 |
Horizontal axis wind turbine working at maximum power coefficient continuously R Lanzafame, M Messina Renewable energy 35 (1), 301-306, 2010 | 103 | 2010 |
Design and performance of a double-pitch wind turbine with non-twisted blades R Lanzafame, M Messina Renewable Energy 34 (5), 1413-1420, 2009 | 103 | 2009 |
Power curve control in micro wind turbine design R Lanzafame, M Messina Energy 35 (2), 556-561, 2010 | 77 | 2010 |
Domenico di Giovanni detto il Burchiello M MEssINA Sonetti inediti 1952, 1952 | 65 | 1952 |
BEM theory: How to take into account the radial flow inside of a 1-D numerical code R Lanzafame, M Messina Renewable Energy 39 (1), 440-446, 2012 | 60 | 2012 |
Stiffness of variable thickness Belleville springs G La Rosa, M Messina, A Risitano J. Mech. Des. 123 (2), 294-299, 2001 | 56 | 2001 |
Ice Gross Heat Release Strongly Influenced By Specific Heat Ratio Valves R Lanzafame, M Messina International Journal of Automotive Technology 4 (3), 125-133, 2003 | 52 | 2003 |
CFD modeling of a ducted Savonius wind turbine for the evaluation of the blockage effects on rotor performance S Mauro, S Brusca, R Lanzafame, M Messina Renewable Energy 141, 28-39, 2019 | 51 | 2019 |
Internal combustion engine heat release calculation using single-zone and CFD 3D numerical models S Mauro, R Şener, MZ Gül, R Lanzafame, M Messina, S Brusca International Journal of Energy and Environmental Engineering 9, 215-226, 2018 | 46 | 2018 |
On the possibility to run an internal combustion engine on acetylene and alcohol S Brusca, R Lanzafame, AMC Garrano, M Messina Energy Procedia 45, 889-898, 2014 | 46 | 2014 |
Recent advances in induced breeding of the dusky grouper Epinephelus marginatus (Lowe, 1834) G Marino, E Azzurro, MG Finoia, MT Messina, A Massari, A Mandich Cahiers Options Méditerranéenes 47, 215-225, 2000 | 45 | 2000 |
Small-scale open-circuit wind tunnel: Design criteria, construction and calibration S Mauro, S Brusca, R Lanzafame, F Famoso, A Galvagno, M Messina International Journal of Applied Engineering Research 12 (23), 13649-13662, 2017 | 44 | 2017 |
Pm10 dispersion modeling by means of cfd 3d and Eulerian–Lagrangian models: analysis and comparison with experiments S Brusca, F Famoso, R Lanzafame, S Mauro, M Messina, S Strano Energy procedia 101, 329-336, 2016 | 39 | 2016 |
HAWT design and performance evaluation: improving the BEM theory mathematical models R Lanzafame, S Mauro, M Messina Energy Procedia 82, 172-179, 2015 | 37 | 2015 |
An investigation about natural radioactivity, hydrochemistry, and metal pollution in groundwater from Calabrian selected areas, southern Italy F Caridi, M Messina, M D’agostino Environmental Earth Sciences 76 (19), 668, 2017 | 34 | 2017 |