关注
Gaoming Zhu
标题
引用次数
引用次数
年份
Improving ductility of a Mg alloy via non-basal< a> slip induced by Ca addition
G Zhu, L Wang, H Zhou, J Wang, Y Shen, P Tu, H Zhu, W Liu, P Jin, ...
International Journal of Plasticity 120, 164-179, 2019
2152019
Effect of heat treatment on the tensile behavior of selective laser melted Ti-6Al-4V by in situ X-ray characterization
D Zhang, L Wang, H Zhang, A Maldar, G Zhu, W Chen, JS Park, J Wang, ...
Acta Materialia 189, 93-104, 2020
1212020
Highly deformable Mg–Al–Ca alloy with Al2Ca precipitates
G Zhu, L Wang, J Wang, J Wang, JS Park, X Zeng
Acta Materialia 200, 236-245, 2020
992020
Slip-twinning interdependent activation across phase boundaries: An in-situ investigation of a Ti-Al-V-Fe (α+ β) alloy
S Wei, G Zhu, CC Tasan
Acta Materialia 206, 116520, 2021
582021
Predicting tensile properties of AZ31 magnesium alloys by machine learning
X Xu, L Wang, G Zhu, X Zeng
Jom 72 (11), 3935-3942, 2020
512020
Origins of high ductility exhibited by an extruded magnesium alloy Mg-1.8 Zn-0.2 Ca: Experiments and crystal plasticity modeling
J Wang, G Zhu, L Wang, E Vasilev, JS Park, G Sha, X Zeng, M Knezevic
Journal of Materials Science & Technology 84, 27-42, 2021
462021
Investigation of the alloying effect on deformation behavior in Mg by Visco-Plastic Self-Consistent modeling
A Maldar, L Wang, G Zhu, X Zeng
Journal of Magnesium and Alloys 8 (1), 210-218, 2020
422020
Dislocation behavior in a polycrystalline Mg-Y alloy using multi-scale characterization and VPSC simulation
B Zhou, L Wang, J Wang, A Maldar, G Zhu, H Jia, P Jin, X Zeng, Y Li
Journal of Materials Science & Technology 98, 87-98, 2022
412022
Understanding the high strength and good ductility in LPSO-containing Mg alloy using synchrotron X-ray diffraction
J Wang, L Wang, G Zhu, B Zhou, T Ying, X Zhang, Q Huang, Y Shen, ...
Metallurgical and Materials Transactions A 49, 5382-5392, 2018
352018
Predicting grain boundary damage by machine learning
S Zhang, L Wang, G Zhu, M Diehl, A Maldar, X Shang, X Zeng
International Journal of Plasticity 150, 103186, 2022
332022
Understanding the Strengthening Effect of β1 Precipitates in Mg-Nd Using In Situ Synchrotron X-ray Diffraction
B Zhou, L Wang, G Zhu, J Wang, W Wen, X Zeng
Jom 70, 2315-2320, 2018
312018
High-temperature crack-healing behaviour and strength recovery of (MoNb) Si2
G Zhu, X Wang, Q Lu, G Wu, P Feng
Applied Surface Science 343, 41-48, 2015
302015
Synthesis and Properties of MoSi2–MoB–SiC Ceramics
G Zhu, X Wang, P Feng, Z Liu, J Niu, F Akhtar
Journal of the American Ceramic Society 99 (4), 1147-1150, 2016
292016
The effect of stress state and strain partition mode on the damage behavior of a Mg-Ca alloy
X Shang, H Zhang, L Wang, G Zhu, Z Cui, MW Fu, X Zeng
International Journal of Plasticity 144, 103040, 2021
282021
Grain-size effect on the deformation of Mg–3Al–3Sn alloy: Experiments and elastic-viscoplastic self-consistent modeling
G Zhu, L Wang, Y Sun, X Shang, J Wang, H Wang, X Zeng
International Journal of Plasticity 143, 103018, 2021
282021
Predicting twin nucleation in a polycrystalline Mg alloy using machine learning methods
Z Tong, L Wang, G Zhu, X Zeng
Metallurgical and Materials Transactions A 50, 5543-5560, 2019
282019
Accelerated development of high-strength magnesium alloys by machine learning
Y Liu, L Wang, H Zhang, G Zhu, J Wang, Y Zhang, X Zeng
Metallurgical and Materials Transactions A 52, 943-954, 2021
272021
Developing ductile and isotropic Ti alloy with tailored composition for laser powder bed fusion
L Wang, Z Song, X Zhang, JS Park, J Almer, G Zhu, Y Chen, Q Li, X Zeng, ...
Additive Manufacturing 52, 102656, 2022
222022
Identification of active slip systems in polycrystals by Slip Trace-Modified Lattice Rotation Analysis (ST-MLRA)
B Yang, C Shi, R Lai, D Shi, D Guan, G Zhu, Y Cui, G Xie, Y Li, A Chiba, ...
Scripta Materialia 214, 114648, 2022
212022
Enhancing strength–ductility synergy in a Mg–Gd–Y–Zr alloy at sub-zero temperatures via high dislocation density and shearable precipitates
X Qi, Y Li, X Xu, Y Liu, H Zhang, Q Zhu, G Zhu, J Wang, M Huang, X Zeng
Journal of Materials Science & Technology 166, 123-132, 2023
202023
系统目前无法执行此操作,请稍后再试。
文章 1–20