Mechanical and bio-corrosion properties of quaternary Mg–Ca–Mn–Zn alloys compared with binary Mg–Ca alloys HR Bakhsheshi-Rad, MH Idris, MR Abdul-Kadir, A Ourdjini, M Medraj, ... Materials & Design 53, 283-292, 2014 | 322 | 2014 |
In-situ thermal analysis and macroscopical characterization of Mg–xCa and Mg–0.5 Ca–xZn alloy systems S Farahany, HR Bakhsheshi-Rad, MH Idris, MRA Kadir, AF Lotfabadi, ... Thermochimica acta 527, 180-189, 2012 | 123 | 2012 |
Evaluation of the effect of Bi, Sb, Sr and cooling condition on eutectic phases in an Al–Si–Cu alloy (ADC12) by in situ thermal analysis S Farahany, A Ourdjini, MH Idrsi, SG Shabestari Thermochimica Acta 559, 59-68, 2013 | 114 | 2013 |
Eutectic spacing selection in Al–Cu system A Ourdjini, J Liu, R Elliott Materials science and technology 10 (4), 312-318, 1994 | 104 | 1994 |
The usage of computer-aided cooling curve thermal analysis to optimise eutectic refiner and modifier in Al–Si alloys S Farahany, A Ourdjini, MH Idris Journal of thermal analysis and calorimetry 109 (1), 105-111, 2012 | 83 | 2012 |
Refinement of Mg2Si reinforcement in a commercial Al–20% Mg2Si in-situ composite with bismuth, antimony and strontium NA Nordin, S Farahany, A Ourdjini, TAA Bakar, E Hamzah Materials Characterization 86, 97-107, 2013 | 78 | 2013 |
Settling of silicon carbide particles in cast metal matrix composites A Ourdjini, KC Chew, BT Khoo Journal of Materials Processing Technology 116 (1), 72-76, 2001 | 77 | 2001 |
Effect of primary and eutectic Mg2Si crystal modifications on the mechanical properties and sliding wear behaviour of an Al–20Mg2Si–2Cu–xBi composite S Farahany, H Ghandvar, NA Nordin, A Ourdjini, MH Idris Journal of Materials Science & Technology 32 (11), 1083-1097, 2016 | 73 | 2016 |
Computer-aided cooling curve thermal analysis of near eutectic Al–Si–Cu–Fe alloy: Effect of silicon modifier/refiner and solidification conditions on the nucleation and growth … S Farahany, A Ourdjini, MH Idris, SG Shabestari Journal of thermal analysis and calorimetry 114, 705-717, 2013 | 72 | 2013 |
EIS study of corrosion behavior of metallic materials in ethanol blended gasoline containing water as a contaminant H Jafari, MH Idris, A Ourdjini, H Rahimi, B Ghobadian Fuel 90 (3), 1181-1187, 2011 | 71 | 2011 |
Hardness and mechanical property relationships in directionally solidified aluminium-silicon eutectic alloys with different silicon morphologies S Khan, A Ourdjini, QS Named, MA Alam Najafabadi, R Elliott Journal of materials science 28, 5957-5962, 1993 | 71 | 1993 |
A new approach to assess the effects of Sr and Bi interaction in ADC12 Al–Si die casting alloy S Farahany, A Ourdjini, TAA Bakar, MH Idris Thermochimica Acta 575, 179-187, 2014 | 56 | 2014 |
Effect of bismuth on microstructure of unmodified and Sr-modified Al-7Si-0.4 Mg alloys S Farahany, A Ourdjini, MH Idris, LT Thai Transactions of Nonferrous Metals Society of China 21 (7), 1455-1464, 2011 | 56 | 2011 |
Microstructure, mechanical properties and corrosion behavior of Al–Si–Cu–Zn–X (X= Bi, Sb, Sr) die cast alloy S Farahany, A Ourdjini, HR Bakhsheshi-Rad Transactions of Nonferrous Metals Society of China 26 (1), 28-38, 2016 | 44 | 2016 |
The influence of bismuth, antimony, and strontium on microstructure, thermal, and machinability of aluminum-silicon alloy MM Barzani, S Farahany, NM Yusof, A Ourdjini Materials and manufacturing processes 28 (11), 1184-1190, 2013 | 40 | 2013 |
Effect of pattern coating thickness on characteristics of lost foam Al–Si–Cu alloy casting M Karimian, A Ourdjini, MH Idris, H Jafari Transactions of Nonferrous Metals Society of China 22 (9), 2092-2097, 2012 | 39 | 2012 |
High temperature oxidation of AZ91D magnesium alloy granule during in-situ melting H Jafari, MH Idris, A Ourdjini Corrosion Science 53 (2), 655-663, 2011 | 37 | 2011 |
Microstructure development, phase reaction characteristics and mechanical properties of a commercial Al–20% Mg2Si–xCe in situ composite solidified at a slow cooling rate NA Nordin, S Farahany, TAA Bakar, E Hamzah, A Ourdjini Journal of Alloys and Compounds 650, 821-834, 2015 | 36 | 2015 |
The sequence of intermetallic formation and solidification pathway of an Al–13Mg–7Si–2Cu in-situ composite S Farahany, NA Nordin, A Ourdjini, TAA Bakar, E Hamzah, MH Idris, ... Materials characterization 98, 119-129, 2014 | 36 | 2014 |
Interflake spacing–growth velocity relationship in Al–Si and Al–CuAl2 eutectic alloys S Khan, A Ourdjini, R Elliott Materials science and technology 8 (6), 516-522, 1992 | 36 | 1992 |