Compressive strength evaluation of structural lightweight concrete by non-destructive ultrasonic pulse velocity method JA Bogas, MG Gomes, A Gomes Ultrasonics 53 (5), 962-972, 2013 | 411 | 2013 |
Green roofs energy performance in Mediterranean climate CM Silva, MG Gomes, M Silva Energy and buildings 116, 318-325, 2016 | 223 | 2016 |
Contribution of structural lightweight aggregate concrete to the reduction of thermal bridging effect in buildings S Real, MG Gomes, AM Rodrigues, JA Bogas Construction and Building Materials 121, 460-470, 2016 | 191 | 2016 |
Experimental and numerical study of wind pressures on irregular-plan shapes MG Gomes, AM Rodrigues, P Mendes Journal of Wind Engineering and Industrial Aerodynamics 93 (10), 741-756, 2005 | 190 | 2005 |
Thermal conductivity of structural lightweight aggregate concrete S Real, JA Bogas, MG Gomes, B Ferrer Magazine of Concrete Research 68 (15), 798-808, 2016 | 127 | 2016 |
The influence of moisture content on the thermal conductivity of external thermal mortars MG Gomes, I Flores-Colen, LM Manga, A Soares, J De Brito Construction and Building Materials 135, 279-286, 2017 | 112 | 2017 |
Solar and visible optical properties of glazing systems with venetian blinds: Numerical, experimental and blind control study MG Gomes, AJ Santos, AM Rodrigues Building and Environment 71, 47-59, 2014 | 103 | 2014 |
Thermal conductivity measurement of thermal insulating mortars with EPS and silica aerogel by steady-state and transient methods MG Gomes, I Flores-Colen, F Da Silva, M Pedroso Construction and Building Materials 172, 696-705, 2018 | 89 | 2018 |
Estimation of water absorbed by expanding clay aggregates during structural lightweight concrete production JA Bogas, A Gomes, MG Gomes Materials and Structures 45, 1565-1576, 2012 | 76 | 2012 |
Bonding of steel reinforcement in structural expanded clay lightweight aggregate concrete: The influence of failure mechanism and concrete composition JA Bogas, MG Gomes, S Real Construction and Building Materials 65, 350-359, 2014 | 75 | 2014 |
Unstabilized and stabilized compressed earth blocks with partial incorporation of recycled aggregates JA Bogas, M Silva, M Glória Gomes International Journal of Architectural Heritage 13 (4), 569-584, 2019 | 74 | 2019 |
The use of 3D GIS to analyse the influence of urban context on buildings’ solar energy potential R Machete, AP Falcão, MG Gomes, AM Rodrigues Energy and Buildings 177, 290-302, 2018 | 73 | 2018 |
Capillary absorption of structural lightweight aggregate concrete J Alexandre Bogas, MG Gomes, S Real Materials and Structures 48, 2869-2883, 2015 | 72 | 2015 |
Physical, mechanical, and microstructural characterisation of an innovative thermal insulating render incorporating silica aerogel M Pedroso, I Flores-Colen, JD Silvestre, MG Gomes, L Silva, L Ilharco Energy and Buildings 211, 109793, 2020 | 71 | 2020 |
Gap inner pressures in multi-storey double skin facades FM da Silva, MG Gomes Energy and Buildings 40 (8), 1553-1559, 2008 | 66 | 2008 |
Measuring and estimating airflow in naturally ventilated double skin facades FM da Silva, MG Gomes, AM Rodrigues Building and Environment 87, 292-301, 2015 | 64 | 2015 |
Performance parameters of ETICS: Correlating water resistance, bio-susceptibility and surface properties JL Parracha, G Borsoi, I Flores-Colen, R Veiga, L Nunes, A Dionísio, ... Construction and Building Materials 272, 121956, 2021 | 59 | 2021 |
Physical performance of industrial and EPS and cork experimental thermal insulation renders MG Gomes, I Flores-Colen, H Melo, A Soares Construction and Building Materials 198, 786-795, 2019 | 53 | 2019 |
In-situ assessment of physical performance and degradation analysis of rendering walls A Menezes, MG Gomes, I Flores-Colen Construction and Building Materials 75, 283-292, 2015 | 53 | 2015 |
Thermal and visual comfort, energy use and environmental performance of glazing systems with solar control films H Teixeira, MG Gomes, AM Rodrigues, J Pereira Building and Environment 168, 106474, 2020 | 50 | 2020 |