| Investigation of functionally graded TPMS structures fabricated by additive manufacturing S Yu, J Sun, J Bai Materials & Design 182, 108021, 2019 | 289 | 2019 |
| Study of selective laser melting (SLM) Inconel 718 part surface improvement by electrochemical polishing Z Baicheng, L Xiaohua, B Jiaming, G Junfeng, W Pan, S Chen-nan, ... Materials & Design 116, 531-537, 2017 | 250 | 2017 |
| 3D soft auxetic lattice structures fabricated by selective laser sintering: TPU powder evaluation and process optimization S Yuan, F Shen, J Bai, CK Chua, J Wei, K Zhou Materials & Design 120, 317-327, 2017 | 224 | 2017 |
| Effect of surface treatment on the dispersion of nano zirconia particles in non-aqueous suspensions for stereolithography J Sun, J Binner, J Bai Journal of the European Ceramic Society 39 (4), 1660-1667, 2019 | 160 | 2019 |
| Numerical and experimental study of laser aided additive manufacturing for melt-pool profile and grain orientation analysis J Song, Y Chew, G Bi, X Yao, B Zhang, J Bai, SK Moon Materials & Design 137, 286-297, 2018 | 127 | 2018 |
| Influence of carbon nanotubes on the rheology and dynamic mechanical properties of polyamide-12 for laser sintering J Bai, RD Goodridge, RJM Hague, M Song, M Okamoto Polymer Testing 36, 95-100, 2014 | 125 | 2014 |
| A review on additive manufacturing of ceramic matrix composites J Sun, D Ye, J Zou, X Chen, Y Wang, J Yuan, H Liang, H Qu, J Binner, ... Journal of Materials Science & Technology 138, 1-16, 2023 | 124 | 2023 |
| Material evaluation and process optimization of CNT-coated polymer powders for selective laser sintering S Yuan, J Bai, CK Chua, J Wei, K Zhou Polymers 8 (10), 370, 2016 | 121 | 2016 |
| The process and performance comparison of polyamide 12 manufactured by multi jet fusion and selective laser sintering Z Xu, Y Wang, D Wu, KP Ananth, J Bai Journal of Manufacturing Processes 47, 419-426, 2019 | 115 | 2019 |
| Improving the mechanical properties of laser‐sintered polyamide 12 through incorporation of carbon nanotubes J Bai, RD Goodridge, RJM Hague, M Song Polymer Engineering & Science 53 (9), 1937-1946, 2013 | 113 | 2013 |
| Current status and prospects of polymer powder 3D printing technologies Y Wang, Z Xu, D Wu, J Bai Materials 13 (10), 2406, 2020 | 102 | 2020 |
| 3D printing of zirconia via digital light processing: optimization of slurry and debinding process J Sun, J Binner, J Bai Journal of the European Ceramic Society 40 (15), 5837-5844, 2020 | 101 | 2020 |
| The effect of processing conditions on the mechanical properties of polyethylene produced by selective laser sintering J Bai, B Zhang, J Song, G Bi, P Wang, J Wei Polymer Testing 52, 89-93, 2016 | 99 | 2016 |
| Highly enhanced thermal conductivity of thermoplastic nanocomposites with a low mass fraction of MWCNTs by a facilitated latex approach S Yuan, J Bai, CK Chua, J Wei, K Zhou Composites Part A: Applied Science and Manufacturing 90, 699-710, 2016 | 96 | 2016 |
| 3D printing of reduced graphene oxide aerogels for energy storage devices: a paradigm from materials and technologies to applications B Guo, G Liang, S Yu, Y Wang, C Zhi, J Bai Energy Storage Materials 39, 146-165, 2021 | 94 | 2021 |
| Thermal influence of CNT on the polyamide 12 nanocomposite for selective laser sintering J Bai, RD Goodridge, S Yuan, K Zhou, CK Chua, J Wei Molecules 20 (10), 19041-19050, 2015 | 92 | 2015 |
| Fabrication of piezoelectric nano-ceramics via stereolithography of low viscous and non-aqueous suspensions W Wang, J Sun, B Guo, X Chen, KP Ananth, J Bai Journal of the European Ceramic Society 40 (3), 682-688, 2020 | 91 | 2020 |
| Microstructure and mechanical properties of Inconel 625/nano-TiB2 composite fabricated by LAAM B Zhang, G Bi, P Wang, J Bai, Y Chew, MS Nai Materials & Design 111, 70-79, 2016 | 88 | 2016 |
| Energy absorption of thermoplastic polyurethane lattice structures via 3D printing: modeling and prediction F Shen, S Yuan, Y Guo, B Zhao, J Bai, M Qwamizadeh, CK Chua, J Wei, ... International Journal of Applied Mechanics 8 (07), 1640006, 2016 | 82 | 2016 |
| Development and evaluation of Al2O3–ZrO2 composite processed by digital light 3D printing T Zheng, W Wang, J Sun, J Liu, J Bai Ceramics International 46 (7), 8682-8688, 2020 | 81 | 2020 |
