Lab-on-a-chip based immunosensor principles and technologies for the detection of cardiac biomarkers: a review MI Mohammed, MPY Desmulliez Lab on a Chip 11 (4), 569-595, 2011 | 365 | 2011 |
Lab-on-a-chip or Chip-in-a-lab: Challenges of Commercialization Lost in Translation MI Mohammed, S Haswell, I Gibson Procedia Technology 20, 54-59, 2015 | 255 | 2015 |
Design of a Patient Specific, 3D printed Arm Cast I Fitzpatrick, AP, Mohammed, MI, Collins, PK and Gibson KnE Engineering 2 (2), 135-142, 2017 | 126 | 2017 |
Customised design and development of patient specific 3D printed whole mandible implant MI Mohammed, AP Fitzpatrick, SK Malyala, I Gibson Proceedings of 27th Solid Freeform Fabrication Symposium, Austin TX, 1708-1717, 2016 | 116 | 2016 |
A low carbon footprint approach to the reconstitution of plastics into 3D-printer filament for enhanced waste reduction MI Mohammed, M Mohan, A Das, MD Johnson, PS Badwal, D McLean, ... KnE Engineering, 234-241, 2017 | 113 | 2017 |
A review of laser engineered net shaping (LENS) build and process parameters of metallic parts M Izadi, A Farzaneh, M Mohammed, I Gibson, B Rolfe Rapid prototyping journal 26 (6), 1059-1078, 2020 | 108 | 2020 |
Applications of 3D topography scanning and multi-material additive manufacturing for facial prosthesis development and production MI Mohammed, J Tatineni, B Cadd, G Peart, I Gibson Proceedings of 27th Solid Freeform Fabrication Symposium, Austin TX, 1695-1707, 2016 | 108 | 2016 |
Customised design of a patient specific 3D printed whole mandible implant MI Mohammed, AP Fitzpatrick, I Gibson KnE Engineering, 104-111, 2017 | 99 | 2017 |
Investigation of closed-loop manufacturing with acrylonitrile butadiene styrene over multiple generations using additive manufacturing MI Mohammed, D Wilson, E Gomez-Kervin, B Tang, J Wang ACS Sustainable Chemistry & Engineering 7 (16), 13955-13969, 2019 | 88 | 2019 |
Advanced auricular prosthesis development by 3D modelling and multi-material printing MI Mohammed, J Tatineni, B Cadd, G Peart, I Gibson KnE Engineering, 37-43, 2017 | 83 | 2017 |
Design and fabrication considerations for three dimensional scaffold structures MI Mohammed, PS Badwal, I Gibson KnE Engineering, 120-126, 2017 | 73 | 2017 |
EcoPrinting: Investigating the use of 100% recycled Acrylonitrile Butadiene Styrene (ABS) for Additive Manufacturing MI Mohammed, A Das, E Gomez-Kervin, D Wilson, I Gibson Proceedings of the 28th Solid Freeform Fabrication Symposium, Austin, TX …, 2017 | 71 | 2017 |
Autonomous capillary microfluidic system with embedded optics for improved troponin I cardiac biomarker detection MI Mohammed, MPY Desmulliez Biosensors and Bioelectronics 61, 478-484, 2014 | 69 | 2014 |
Effect of layer thickness and cross-section geometry on the tensile and compression properties of 3D printed ABS J Nomani, D Wilson, M Paulino, MI Mohammed Materials Today Communications 22, 100626, 2020 | 62 | 2020 |
Investigation on the effect of heat treatment and process parameters on the tensile behaviour of SLM Ti-6Al-4V parts AM Khorasani, I Gibson, A Ghaderi, MI Mohammed The International Journal of Advanced Manufacturing Technology 101, 3183-3197, 2019 | 60 | 2019 |
Augmented patient-specific facial prosthesis production using medical imaging modelling and 3D printing technologies for improved patient outcomes MI Mohammed, B Cadd, G Peart, I Gibson Virtual and Physical Prototyping 13 (3), 164-176, 2018 | 53 | 2018 |
A review of 3D printed patient specific immobilisation devices in radiotherapy A Asfia, JI Novak, MI Mohammed, B Rolfe, T Kron Physics and imaging in radiation oncology 13, 30-35, 2020 | 51 | 2020 |
Fabrication of microfluidic devices: Improvement of surface quality of CO2 laser machined poly (methylmethacrylate) polymer MI Mohammed, MNHZ Alam, A Kouzani, I Gibson Journal of Micromechanics and Microengineering 27 (1), 015021, 2016 | 51 | 2016 |
Rapid laser prototyping of valves for microfluidic autonomous systems MI Mohammed, E Abraham, MPY Desmulliez Journal of micromechanics and microengineering 23 (3), 035034, 2013 | 51 | 2013 |
EcoPrinting: investigation of solar powered plastic recycling and additive manufacturing for enhanced waste management and sustainable manufacturing MI Mohammed, D Wilson, E Gomez-Kervin, L Rosson, J Long 2018 IEEE conference on technologies for sustainability (SusTech), 1-6, 2018 | 46 | 2018 |