Generation of electrical energy using lead zirconate titanate (PZT-5A) piezoelectric material: Analytical, numerical and experimental verifications Z Butt, RA Pasha, F Qayyum, Z Anjum, N Ahmad, H Elahi Journal of Mechanical Science and Technology 30, 3553-3558, 2016 | 77 | 2016 |
Investigation of fatigue crack growth rate in CARALL, ARALL and GLARE W Asghar, MA Nasir, F Qayyum, M Shah, M Azeem, S Nauman, ... Fatigue & Fracture of Engineering Materials & Structures 40 (7), 1086-1100, 2017 | 60 | 2017 |
Response of piezoelectric materials on thermomechanical shocking and electrical shocking for aerospace applications H Elahi, M Eugeni, P Gaudenzi, F Qayyum, RF Swati, HM Khan Microsystem Technologies 24, 3791-3798, 2018 | 53 | 2018 |
Effect of various surface preparation techniques on the delamination properties of vacuum infused Carbon fiber reinforced aluminum laminates (CARALL): Experimentation and … F Khan, F Qayyum, W Asghar, M Azeem, Z Anjum, A Nasir, M Shah Journal of Mechanical Science and Technology 31, 5265-5272, 2017 | 42 | 2017 |
Prediction of non-propagating fretting fatigue cracks in Ti6Al4V sheet tested under pin-in-dovetail configuration: Experimentation and numerical simulation Z Anjum, F Qayyum, S Khushnood, S Ahmed, M Shah Materials & Design 87, 750-758, 2015 | 41 | 2015 |
Numerical simulation of thermal fatigue behavior in a cracked disc of AISI H-11 tool steel F Qayyum, M Shah, O Shakeel, F Mukhtar, M Salem, F Rezai-Aria Engineering Failure Analysis 62, 242-253, 2016 | 38 | 2016 |
3D numerical simulation of thermal fatigue damage in wedge specimen of AISI H13 tool steel F Qayyum, A Kamran, A Ali, M Shah Engineering Fracture Mechanics 180, 240-253, 2017 | 35 | 2017 |
Effect of 3D representative volume element (RVE) thickness on stress and strain partitioning in crystal plasticity simulations of multi-phase materials F Qayyum, AA Chaudhry, S Guk, M Schmidtchen, R Kawalla, U Prahl Crystals 10 (10), 944, 2020 | 34 | 2020 |
Comparison of thermomechanical stresses produced in work rolls during hot and cold rolling of Cartridge Brass 1101 F Qayyum, M Shah, S Manzoor, M Abbas Materials Science and Technology 31 (3), 317-324, 2015 | 28 | 2015 |
Investigation of electrical properties & mechanical quality factor of piezoelectric material (PZT-4A) Z Butt, Z Anjum, A Sultan, F Qayyum, HM Khurram Ali, S Mehmood Journal of Electrical Engineering and Technology 12 (2), 846-851, 2017 | 27 | 2017 |
Modeling the local deformation and transformation behavior of cast X8CrMnNi16-6-6 TRIP steel and 10% Mg-PSZ composite using a continuum mechanics-based crystal plasticity model F Qayyum, S Guk, M Schmidtchen, R Kawalla, U Prahl Crystals 10 (3), 221, 2020 | 25 | 2020 |
Effect of chrome plating and varying hardness on the fretting fatigue life of AISI D2 components F Mukhtar, F Qayyum, Z Anjum, M Shah Wear 418, 215-225, 2019 | 25 | 2019 |
Investigating the Effect of Cementite Particle Size and Distribution on Local Stress and Strain Evolution in Spheroidized Medium Carbon Steels using Crystal Plasticity‐Based … M Umar, F Qayyum, MU Farooq, LA Khan, S Guk, U Prahl steel research international 92 (3), 2000407, 2021 | 23 | 2021 |
Investigating the local deformation and transformation behavior of sintered X3CrMnNi16-7-6 TRIP steel using a calibrated crystal plasticity-based numerical simulation model F Qayyum, S Guk, S Prüger, M Schmidtchen, I Saenko, B Kiefer, ... International Journal of Materials Research 111 (5), 392-404, 2020 | 23 | 2020 |
Development of multi-physics numerical simulation model to investigate thermo-mechanical fatigue crack propagation in an autofrettaged gun barrel N Hussain, F Qayyum, RA Pasha, M Shah Defence Technology 17 (5), 1579-1591, 2021 | 22 | 2021 |
Effect of the 3rd dimension within the representative volume element (Rve) on damage initiation and propagation during full-phase numerical simulations of single and multi … F Qayyum, M Umar, S Guk, M Schmidtchen, R Kawalla, U Prahl Materials 14 (1), 42, 2020 | 22 | 2020 |
Characterization and implementation of a piezoelectric energy harvester configuration: analytical, numerical and experimental approach H Elahi, M Rizwan Mughal, M Eugeni, F Qayyum, A Israr, A Ali, K Munir, ... Integrated Ferroelectrics 212 (1), 39-60, 2020 | 22 | 2020 |
Experimental investigations and multiscale modeling to study the effect of sulfur content on formability of 16MnCr5 alloy steel F Qayyum, S Guk, R Kawalla, U Prahl steel research international 90 (6), 1800369, 2019 | 20 | 2019 |
Prediction of crack tip plasticity induced due to variation in solidification rate of weld pool and its effect on fatigue crack propagation rate (FCPR) M Ullah, CS Wu, F Qayyum Journal of Mechanical Science and Technology 32, 3625-3635, 2018 | 20 | 2018 |
Numerical simulation and experimental verification of CMOD in CT specimens of TIG welded AA2219-T87 M Ullah, RA Pasha, GY Chohan, F Qayyum Arabian Journal for Science and Engineering 40, 935-944, 2015 | 20 | 2015 |