| Modeling of microwave heating of particulate metals P Mishra, A Upadhyaya, G Sethi Metallurgical and Materials Transactions B 37, 839-845, 2006 | 170 | 2006 |
| Microwave and conventional sintering of premixed and prealloyed Cu-12Sn bronze G Sethi, A Upadhyaya, D Agrawal Science of Sintering 35 (2), 49-65, 2003 | 117 | 2003 |
| An overview of dynamic compaction in powder metallurgy G Sethi, NS Myers, RM German International Materials Reviews 53 (4), 219-234, 2008 | 87 | 2008 |
| High velocity compaction compared with conventional compaction G Sethi, E Hauck, RM German Materials Science and Technology 22 (8), 955-959, 2006 | 64 | 2006 |
| Effect of heating mode on the densification and microstructural homogenization response of premixed bronze A Upadhyaya, G Sethi Scripta materialia 56 (6), 469-472, 2007 | 39 | 2007 |
| Influence of reactive sputter deposition conditions on crystallization of zirconium oxide thin films G Sethi, P Sunal, MW Horn, MT Lanagan Journal of Vacuum Science & Technology A 27 (3), 577-583, 2009 | 25 | 2009 |
| Structure and dielectric properties of amorphous tantalum pentoxide thin film capacitors G Sethi, M Olszta, J Li, J Sloppy, MW Horn, EC Dickey, MT Lanagan 2007 Annual Report-Conference on Electrical Insulation and Dielectric …, 2007 | 21 | 2007 |
| Linking homogenization and densification in W–Ni–Cu alloys through master sintering curve (MSC) concepts G Sethi, SJ Park, JL Johnson, RM German International Journal of Refractory Metals and Hard Materials 27 (4), 688-695, 2009 | 19 | 2009 |
| Impedance analysis of amorphous and polycrystalline tantalum oxide sputtered films G Sethi, B Bontempo, E Furman, MW Horn, MT Lanagan, ... Journal of Materials Research 26 (6), 745-753, 2011 | 18 | 2011 |
| Microstructural and microhardness studies of microwave sintered Cu-12Sn bronze alloys N Agarwal, G Sethi, A Upadhyaya, D Agrawal, R Roy TRANSACTIONS-POWDER METALLURGY ASSOCIATION OF INDIA HYDERABAD 29, 61, 2003 | 11 | 2003 |
| Microwave sintering of Cu–12Sn alloy A Upadhyaya, G Sethi, D Agrawal Proc. sintering 2003 conference, 15-17 September 2003, Penn State University …, 2003 | 10 | 2003 |
| Dielectric Response of tantalum oxide deposited on polyethylene terephthalate (PET) film by low-temperature pulsed-DC sputtering for wound capacitors G Sethi, R Sahul, C Min, P Tewari, E Furman, MW Horn, MT Lanagan IEEE Transactions on Components and Packaging Technologies 32 (4), 915-925, 2009 | 8 | 2009 |
| Influence of impedance contrast on field distribution and tree growth in laminate dielectrics G Sethi, E Furman, B Koch, MT Lanagan Modelling and Simulation in Materials Science and Engineering 22 (2), 025024, 2014 | 7 | 2014 |
| Modelling structure and properties of amorphous silicon boron nitride ceramics JC Schön, A Hannemann, G Sethi, VI Pentin, M Jansen Processing and Application of Ceramics 5 (2), 49-61, 2011 | 7 | 2011 |
| Pressing to full density: fundamental limitations and capabilities of high density powder metallurgy G Sethi Pennsylvania State University, 2004 | 7 | 2004 |
| Densification of Pre-Mixed and Pre-alloyed Cu-12Sn Bronze During Microwave and Convential Sintering A Upadhyaya, G Sethi, H Kim, DK Agrawal, R Roy Advances in Powder Metallurgy and Particulate Materials, 13-362, 2002 | 7 | 2002 |
| An analysis of appraoches to high-performance powder metallurgy RM German, N Myers, T Mueller, G Sethi, RK Enneti Powder Met 2004, 76-88, 2004 | 5 | 2004 |
| Monte Carlo modeling of heterogeneities in ceramic, polymer, and composite capacitors E Furman, G Sethi, B Koch, M Lanagan 2009 IEEE Pulsed Power Conference, 784-789, 2009 | 3 | 2009 |
| Full-density via dynamic compaction RM German, G Sethi, NS Myers ADVANCES IN POWDER METALLURGY AND PARTICULATE MATERIALS 1, 03, 2006 | 2 | 2006 |
| Investigation of structure-dielectric property relationships in zirconium oxide, tantalum pentoxide, and oxide-polymer laminate films for high energy density capacitor applications G Sethi The Pennsylvania State University, 2010 | 1 | 2010 |
Randall M GermanSan Diego State University在 sdsu.edu 的电子邮件经过验证
