Microstructure, mechanical and wear properties of the A357 composites reinforced with dual sized SiC particles A Lakshmikanthan, S Bontha, M Krishna, PG Koppad, T Ramprabhu Journal of Alloys and Compounds 786, 570-580, 2019 | 102 | 2019 |
The effect of heat treatment on the mechanical and tribological properties of dual size SiC reinforced A357 matrix composites A Lakshmikanthan, SB Udayagiri, PG Koppad, M Gupta, K Munishamaiah, ... Journal of Materials Research and Technology 9 (3), 6434-6452, 2020 | 72 | 2020 |
Experimental investigation of effect of fiber length on mechanical, wear, and morphological behavior of silane-treated pineapple leaf fiber reinforced polymer composites PB Anand, A Lakshmikanthan, MP Gowdru Chandrashekarappa, ... Fibers 10 (7), 56, 2022 | 56 | 2022 |
Effect of microstructure, mechanical and wear on Al-CNTs/graphene hybrid MMC’S KKSAL Manjunath Naik H R, Manjunath L H, Vinayak Malik, Manjunath Patel GC Advances in Materials and Processing Technologies, pp 1-14, 2021 | 45* | 2021 |
Mechanical and Tribological Properties of Aluminum-Based Metal-Matrix Composites SDKAM Avinash Lakshmikanthan, Santosh Angadi, Vinayak Malik, Kuldeep K ... Material 6111 (15), Pp1-30, 2022 | 44* | 2022 |
Investigation of High-Temperature Erosion Behavior of NiCrAlY/TiO2 Plasma Coatings on Titanium Substrate G Madhu Sudana Reddy, C Durga Prasad, S Kollur, A Lakshmikanthan, ... JOM 75 (9), 3317-3323, 2023 | 43 | 2023 |
Measurement of Micro Burr and Slot Widths through-Image-Processing:-Comparison-of-Manual-and-Automated-Measurements-in-Micro-Milling ALMA Fatih Akkoyun , Ali Ercetin , Kubilay Aslantas , Danil Yurievich ... Sensors 21 (4432), 1-16, 2021 | 39* | 2021 |
Experimental investigation of selective laser melting parameters for higher surface quality and microhardness properties: Taguchi and super ranking concept approaches R Sheshadri, M Nagaraj, A Lakshmikanthan, MPG Chandrashekarappa, ... journal of materials research and technology 14, 2586-2600, 2021 | 38 | 2021 |
Corrosion behaviour of high-strength Al 7005 alloy and its composites reinforced with industrial waste-based fly ash and glass fibre: comparison of stir cast and extrusion … PK Swamy, S Mylaraiah, MP Gowdru Chandrashekarappa, ... Materials 14 (14), 3929, 2021 | 36 | 2021 |
Electrodeposition Based Preparation of Zn–Ni Alloy and Zn–Ni–WC Nano-Composite Coatings for Corrosion-Resistant Applications K Kumar C.M.P, Avinash Lakshmikanthan, Chandrashekarappa M.P.G, Pimenov D.Y ... Coatings 11 (16), 1-17, 2021 | 36* | 2021 |
The Effect on the dry sliding wear behavior of gravity cast A357 reinforced with dual size silicon carbide particles L Avinash, T Ram Prabhu, S Bontha Applied Mechanics and Materials 829, 83-89, 2016 | 30 | 2016 |
Al/Graphene/CNT Hybrid Composites: Hardness and Sliding Wear Studies SP Manjunath Naik H R, Manjunath L H, Vishwanath Koti, Avinash ... FME Transactions 49 (No 2), 414-421., 2021 | 26 | 2021 |
Mechanical properties and water absorption behaviour of pineapple leaf fibre reinforced polymer composites SPSYAL Praveena B A , Balachandra P Shetty , Vinayaka N , Srikanth H V Advances in Materials and Processing Technologies, 1-17, 2020 | 26* | 2020 |
Physical and mechanical properties, morphological behaviour of pineapple leaf fibre reinforced polyester resin composites SPSYAL Praveena B A , Balachandra P Shetty , Sachin B Advances in Materials and Processing Technologies, 1-14, 2020 | 21* | 2020 |
Investigation of mechanical properties and dry sliding wear behaviour of graphite reinforced Al7068 alloy B Sajjan, L Avinash, S Varun, KN Varun Kumar, A Parthasarathy Applied Mechanics and Materials 867, 10-18, 2017 | 21 | 2017 |
Fabrication and characterization of Al-0.4% Si-0.5% Mg-SiCp using permanent mould casting technique A Parthasarathy, L Avinash, KN Varun Kumar, B Sajjan, S Varun Applied Mechanics and Materials 867, 34-40, 2017 | 20 | 2017 |
Influence of powder composition & morphology on Green density for powder metallurgy processes KR Suresh, S Mahendran, MS Krupashankara, L Avinash International Journal of Innovative Research in Science, Engineering and …, 2015 | 19 | 2015 |
Image processing of Mg-Al-Sn alloy microstructures for determining phase ratios and grain size and correction with manual measurement A Ercetin, F Akkoyun, E Şimşir, DY Pimenov, K Giasin, ... Materials 14 (17), 5095, 2021 | 18 | 2021 |
Comparison based on specific strength and density of in-situ Ti/Al and Ti/Ni metal intermetallic laminates BR Nagarajan Thiyaneshwaran, Chithirai Pon Selvan, Avinash Lakshmikanthan ... Journal of Materials Research and Technology, 2021 | 18 | 2021 |
Mechanical, Microstructure and Wear properties of Al 6113 Fly Ash reinforced Composites: Comparison of as-cast and Heat-treated Conditions SASHHM Vinayaka N, Avinash Lakshmikanthan, Manjunath Patel GC, Chithirai Pon ... Advances in Materials and Processing Technologies, 2021 | 18 | 2021 |