Micromechanisms of deformation and fracture of polypropylene nonwoven fabrics A Ridruejo, C González, J LLorca International Journal of Solids and Structures 48 (1), 153-162, 2011 | 116 | 2011 |
Damage micromechanisms and notch sensitivity of glass-fiber non-woven felts: An experimental and numerical study A Ridruejo, C González, J LLorca Journal of the Mechanics and Physics of Solids 58 (10), 1628-1645, 2010 | 100 | 2010 |
A constitutive model for the in-plane mechanical behavior of nonwoven fabrics A Ridruejo, C González, J LLorca International Journal of Solids and Structures 49 (17), 2215-2229, 2012 | 82 | 2012 |
Deformation and energy dissipation mechanisms of needle-punched nonwoven fabrics: A multiscale experimental analysis F Martínez-Hergueta, A Ridruejo, C González, J Llorca International Journal of Solids and Structures 64, 120-131, 2015 | 63 | 2015 |
Tensile properties of carbon nanotube fibres described by the fibrillar crystallite model JC Fernández-Toribio, B Alemán, Á Ridruejo, JJ Vilatela Carbon 133, 44-52, 2018 | 54 | 2018 |
A composite fabrication sensor based on electrochemical doping of carbon nanotube yarns JC Fernández‐Toribio, A Íñiguez‐Rábago, J Vilà, C González, Á Ridruejo, ... Advanced Functional Materials 26 (39), 7139-7147, 2016 | 49 | 2016 |
Ballistic performance of hybrid nonwoven/woven polyethylene fabric shields F Martinez-Hergueta, A Ridruejo, C González, J LLorca International Journal of Impact Engineering 111, 55-65, 2018 | 46 | 2018 |
Inverse notch sensitivity: Cracks can make nonwoven fabrics stronger A Ridruejo, R Jubera, C González, J LLorca Journal of the Mechanics and Physics of Solids 77, 61-69, 2015 | 46 | 2015 |
Mechanical behavior and deformation micromechanisms of polypropylene nonwoven fabrics as a function of temperature and strain rate R Jubera, A Ridruejo, C González, J LLorca Mechanics of Materials 74, 14-25, 2014 | 40 | 2014 |
Modelling the in-plane strain rate dependent behaviour of woven composites with special emphasis on the non-linear shear response F Martinez-Hergueta, D Ares, A Ridruejo, J Wiegand, N Petrinic Composite Structures 210, 840-857, 2019 | 29 | 2019 |
Influence of fiber orientation on the ballistic performance of needlepunched nonwoven fabrics F Martínez-Hergueta, A Ridruejo, F Gálvez, C González, J LLorca Mechanics of Materials 94, 106-116, 2016 | 27 | 2016 |
Fabrication and characterization of PEEK/PEI multilayer composites Á Alvaredo-Atienza, L Chen, V San-Miguel, Á Ridruejo, ... Polymers 12 (12), 2765, 2020 | 26 | 2020 |
A multiscale micromechanical model of needlepunched nonwoven fabrics F Martinez-Hergueta, A Ridruejo, C González, J LLorca International Journal of Solids and Structures 96, 81-91, 2016 | 26 | 2016 |
Pore structure and electrochemical properties of CNT-based electrodes studied by in situ small/wide angle X-ray scattering C Santos, E Senokos, JC Fernández-Toribio, Á Ridruejo, R Marcilla, ... Journal of Materials Chemistry A 7 (10), 5305-5314, 2019 | 25 | 2019 |
Understanding cooperative loading in carbon nanotube fibres through in-situ structural studies during stretching JC Fernández-Toribio, A Mikhalchan, C Santos, Á Ridruejo, JJ Vilatela Carbon 156, 430-437, 2020 | 22 | 2020 |
Notch effect in failure of fiberglass non-woven materials Y Chen, A Ridruejo, C González, J Llorca, T Siegmund International Journal of Solids and Structures 96, 254-264, 2016 | 20 | 2016 |
Stress Corrosion Cracking of Single‐Crystal Tetragonal ZrO2(Er2O3) A Ridruejo, JY Pastor, J LLorca, A Sayir, VM Orera Journal of the American Ceramic Society 88 (11), 3125-3130, 2005 | 20 | 2005 |
Diffusion and trapping of hydrogen in carbon steel at different temperatures J Sanchez, A Ridruejo, PL de Andres Theoretical and applied fracture mechanics 110, 102803, 2020 | 18 | 2020 |
Numerical simulation of the ballistic response of needle-punched nonwoven fabrics F Martínez-Hergueta, A Ridruejo, C González, J Llorca International Journal of Solids and Structures 106, 56-67, 2017 | 18 | 2017 |
Failure locus of polypropylene nonwoven fabrics under in-plane biaxial deformation A Ridruejo, C González, J Llorca Comptes Rendus Mécanique 340 (4), 307-319, 2012 | 18 | 2012 |