A review of Finite Fracture Mechanics: crack initiation at singular and non-singular stress raisers P Weißgraeber, D Leguillon, W Becker Archive of Applied Mechanics 86, 375-401, 2016 | 253 | 2016 |
Finite fracture mechanics model for mixed mode fracture in adhesive joints P Weißgraeber, W Becker International Journal of Solids and Structures 50 (14-15), 2383-2394, 2013 | 158 | 2013 |
A model for brittle failure in adhesive lap joints of arbitrary joint configuration N Stein, P Weißgraeber, W Becker Composite Structures 133, 707-718, 2015 | 86 | 2015 |
A coupled stress and energy criterion for the assessment of crack initiation in single lap joints: a numerical approach S Hell, P Weißgraeber, J Felger, W Becker Engineering Fracture Mechanics 117, 112-126, 2014 | 85 | 2014 |
Cracks at elliptical holes: stress intensity factor and finite fracture mechanics solution P Weißgraeber, J Felger, D Geipel, W Becker European Journal of Mechanics-A/Solids 55, 192-198, 2016 | 79 | 2016 |
Stress solution for functionally graded adhesive joints N Stein, P Weißgraeber, W Becker International Journal of Solids and Structures 97, 300-311, 2016 | 56 | 2016 |
A general sandwich-type model for adhesive joints with composite adherends P Weißgraeber, N Stein, W Becker International Journal of Adhesion and Adhesives 55, 56-63, 2014 | 53 | 2014 |
Review on the effect of moisture and contamination on the interfacial properties of adhesive joints CSP Borges, EAS Marques, RJC Carbas, C Ueffing, P Weißgraeber, ... Proceedings of the Institution of Mechanical Engineers, Part C: Journal of …, 2021 | 51 | 2021 |
Asymmetric crack onset at open-holes under tensile and in-plane bending loading PL Rosendahl, P Weißgraeber, N Stein, W Becker International Journal of Solids and Structures 113, 10-23, 2017 | 51 | 2017 |
Modeling snow slab avalanches caused by weak-layer failure–Part 1: Slabs on compliant and collapsible weak layers PL Rosendahl, P Weißgraeber The Cryosphere 14 (1), 115-130, 2020 | 46 | 2020 |
Crack nucleation in negative geometries P Weißgraeber, S Hell, W Becker Engineering Fracture Mechanics 168, 93-104, 2016 | 41 | 2016 |
Modeling snow slab avalanches caused by weak-layer failure–Part 2: Coupled mixed-mode criterion for skier-triggered anticracks PL Rosendahl, P Weißgraeber The Cryosphere 14 (1), 131-145, 2020 | 40 | 2020 |
Enhanced XFEM for crack deflection in multi-material joints N Stein, S Dölling, K Chalkiadaki, W Becker, P Weißgraeber International Journal of Fracture 207, 193-210, 2017 | 39 | 2017 |
Crack initiation in single lap joints: effects of geometrical and material properties P Weißgraeber, J Felger, A Talmon l’Armée, W Becker International Journal of Fracture 192, 155-166, 2015 | 32 | 2015 |
Effect of water ingress on the mechanical and chemical properties of polybutylene terephthalate reinforced with glass fibers CSP Borges, A Akhavan-Safar, EAS Marques, RJC Carbas, C Ueffing, ... Materials 14 (5), 1261, 2021 | 29 | 2021 |
Buckling of composite panels: A criterion for optimum stiffener design P Weißgraeber, C Mittelstedt, W Becker Aerospace Science and Technology 16 (1), 10-18, 2012 | 25 | 2012 |
Deep learning for impact detection in composite plates with sparsely integrated sensors AM Damm, C Spitzmüller, ATS Raichle, A Bühler, P Weißgraeber, ... Smart Materials and Structures 29 (12), 125014, 2020 | 21 | 2020 |
Adherend surface roughness effect on the mechanical response of silicone-based adhesive joints H Zarei, MR Marulli, M Paggi, R Pietrogrande, C Üffing, P Weißgraeber Engineering Fracture Mechanics 240, 107353, 2020 | 16 | 2020 |
A new finite fracture mechanics approach for assessing the strength of bonded lap joints P Weißgraeber, W Becker Key Engineering Materials 471, 1075-1080, 2011 | 16 | 2011 |
Temporal evolution of crack propagation characteristics in a weak snowpack layer: conditions of crack arrest and sustained propagation B Bergfeld, A van Herwijnen, G Bobillier, PL Rosendahl, P Weißgraeber, ... Natural Hazards and Earth System Sciences 2023 (23), 293–315, 2023 | 15 | 2023 |