| Influence of radial finishing trajectories to the roughness obtained by milling of spherical surfaces P Cheţan, V Boloş, A Pozdîrcă, A Peterlicean Procedia Technology 12, 420-426, 2014 | 8 | 2014 |
| Inventor-modelare parametrică A Pozdîrcă, K Albert, P Cheţan Editura Universităţii" Petru Maior", 2004 | 6 | 2004 |
| Novel coatings for high performance cutting and dry machining G Strnad, C Paul The International Conference Interdisciplinarity in Engineering INTER-ENG, 75, 2012 | 5 | 2012 |
| Consideration regarding technical conditions imposed to the execution of headlamps used in automotive industry P Chetan, V Boloş MTeM Cluj Napoca of the 9th International Conference Modern Technologies in …, 2009 | 4 | 2009 |
| Effect of phosphate/fluoride electrolytes on mass and dimensional stability of anodization bath manufactured by FDM G Strnad, R Cazacu, P Chetan, ASG Florea, F Peti MATEC Web of Conferences 137, 02012, 2017 | 3 | 2017 |
| Optimized anodization setup for the growth of TiO2 nanotubes on flat surfaces of titanium based materials G Strnad, R Cazacu, P Chetan, Z German-Sallo, L Jakab-Farkas MATEC Web of Conferences 137, 02011, 2017 | 2 | 2017 |
| Bolo܈ V. Research on roughness resulted through milling of the surfaces with cbn tools P Cheţan Proceedings of the 5th Inter-Eng Conference, Tîrgu Mureş, România, 193-196, 2011 | 2 | 2011 |
| Studies regarding the parametrical influences of a cam process on mould's core surface PS Chetan Metalurgia International 15, 45-49, 2010 | 2 | 2010 |
| Optimization of TiO2 nanotubes synthesis on cylindrical surfaces for bio-implants G Strnad, L Jakab-Farkas, P Chetan, C Petrovan MATEC Web of Conferences 178, 04012, 2018 | 1 | 2018 |
| MODELING OF UNDETACHED CHIP SHAPE ON FINISHING PROCESSING TOOLPATH P CHEŢAN, V BOLOŞ Scientific Bulletin of the Petru Maior University of Targu Mures 10 (1), 2013 | | 2013 |
| MODELING OF UNDETACHED CHIP SHAPE ON FINISHING PROCESSING TOOLPATH C Paul, V BOLOS Acta Marisiensis. Seria Technologica 10 (1), 5, 2013 | | 2013 |
| Influence of heat treatment on quality of milled surface PS Chetan, V Bolos The International Conference Interdisciplinarity in Engineering INTER-ENG, 38, 2012 | | 2012 |
| THE INFLUENCE OF THE TOOL PATH REGARDING THE ROUGHNESS RESULTED FROM THE MILLING PROCESS OF THE COMPLEX SURFACES P Chețan, V Boloș Editura Mures, 2011 | | 2011 |
