| Two-dimensional CFD-analysis of micro-patterned surfaces in hydrodynamic lubrication F Sahlin, SB Glavatskih, T Almqvist, R Larsson J. Trib. 127 (1), 96-102, 2005 | 309 | 2005 |
| Transient non-Newtonian elastohydrodynamic lubrication analysis of an involute spur gear R Larsson Wear 207 (1-2), 67-73, 1997 | 207 | 1997 |
| A mixed lubrication model incorporating measured surface topography. Part 1: theory of flow factors F Sahlin, R Larsson, A Almqvist, PM Lugt, P Marklund Proceedings of the Institution of Mechanical Engineers, Part J: Journal of …, 2010 | 191 | 2010 |
| Thermal influence on torque transfer of wet clutches in limited slip differential applications P Marklund, R Mäki, R Larsson, E Höglund, MM Khonsari, J Jang Tribology international 40 (5), 876-884, 2007 | 146 | 2007 |
| Lubricant properties for input to hydrodynamic and elastohydrodynamic lubrication analyses R Larsson, PO Larsson, E Eriksson, M Sjöberg, E Höglund Proceedings of the Institution of Mechanical Engineers, Part J: Journal of …, 2000 | 142 | 2000 |
| Wet clutch friction characteristics obtained from simplified pin on disc test P Marklund, R Larsson Tribology International 41 (9-10), 824-830, 2008 | 136 | 2008 |
| On the dry elasto-plastic contact of nominally flat surfaces A Almqvist, F Sahlin, R Larsson, S Glavatskih Tribology international 40 (4), 574-579, 2007 | 129 | 2007 |
| Boundary and elastohydrodynamic lubrication studies of glycerol aqueous solutions as green lubricants Y Shi, I Minami, M Grahn, M Björling, R Larsson Tribology International 69, 39-45, 2014 | 119 | 2014 |
| Lubricant thermal conductivity and heat capacity under high pressure R Larsson, O Andersson Proceedings of the Institution of Mechanical Engineers, Part J: Journal of …, 2000 | 118 | 2000 |
| A cavitation algorithm for arbitrary lubricant compressibility F Sahlin, A Almqvist, R Larsson, S Glavatskih Tribology International 40 (8), 1294-1300, 2007 | 109 | 2007 |
| Modelling of leakage on metal-to-metal seals F Pérez-Ràfols, R Larsson, A Almqvist Tribology International 94, 421-427, 2016 | 103 | 2016 |
| The significance of oil thermal properties on the performance of a tilting-pad thrust bearing SB Glavatskih, M Fillon, R Larsson J. Trib. 124 (2), 377-385, 2002 | 103 | 2002 |
| Numerical simulation of a wear experiment J Andersson, A Almqvist, R Larsson Wear 271 (11-12), 2947-2952, 2011 | 98 | 2011 |
| The influence of base oil polarity on the tribological performance of zinc dialkyl dithiophospate additives AN Suarez, M Grahn, R Pasaribu, R Larsson Tribology International 43 (12), 2268-2278, 2010 | 94 | 2010 |
| Numerical simulation of a ball impacting and rebounding a lubricated surface R Larsson, E Ho¨ glund | 94 | 1995 |
| Towards the true prediction of EHL friction M Björling, W Habchi, S Bair, R Larsson, P Marklund Tribology International 66, 19-26, 2013 | 93 | 2013 |
| A mixed lubrication model incorporating measured surface topography. Part 2: roughness treatment, model validation, and simulation F Sahlin, R Larsson, P Marklund, A Almqvist, PM Lugt Proceedings of the Institution of Mechanical Engineers, Part J: Journal of …, 2010 | 92 | 2010 |
| A comparison between computational fluid dynamic and Reynolds approaches for simulating transient EHL line contacts T Almqvist, A Almqvist, R Larsson Tribology international 37 (1), 61-69, 2004 | 87 | 2004 |
| The Navier–Stokes approach for thermal EHL line contact solutions T Almqvist, R Larsson Tribology International 35 (3), 163-170, 2002 | 87 | 2002 |
| Friction reduction in elastohydrodynamic contacts by thin-layer thermal insulation M Björling, W Habchi, S Bair, R Larsson, P Marklund Tribology letters 53, 477-486, 2014 | 86 | 2014 |
