Hierarchically porous SiC ultrathin fibers mat with enhanced mass transport, amphipathic property and high-temperature erosion resistance
B Wang, Y Wang, Y Lei, N Wu, Y Gou, C Han… - Journal of Materials …, 2014 - pubs.rsc.org
Porous silicon carbide (SiC) has attracted considerable attention as an alternative catalyst
support, particularly in corrosive and high-temperature environment. Herein, we report a …
support, particularly in corrosive and high-temperature environment. Herein, we report a …
Fabrication and properties of precursor-derived SiBN ternary ceramic fibers
Y Liu, S Peng, Y Cui, X Chang, C Zhang, X Huang… - Materials & Design, 2017 - Elsevier
In this paper, polymer precursor polyborosilazane (PBSZ) was synthesized from
hexamethyldisilazane, HSiCl 3, BCl 3 and CH 3 NH 2 using a multi-step polymerization …
hexamethyldisilazane, HSiCl 3, BCl 3 and CH 3 NH 2 using a multi-step polymerization …
Curing green fibres infusible by electron beam irradiation for the preparation of SiBNC ceramic fibres
Curing green fibres infusible is an essential procedure for the preparation of SiBNC ceramic
fibres. Previously, green fibres had been fabricated by one-pot synthesis of …
fibres. Previously, green fibres had been fabricated by one-pot synthesis of …
Synthesis and characterization of amorphous SiBNC ceramic fibers
S Mou, Y Liu, K Han, M Yu - Ceramics International, 2015 - Elsevier
A novel precursor for preparing SiBNC ceramic fibers was successfully prepared via co-
polymerization of trichlorosilane (SiHCl 3), boron trichloride (BCl 3) and methyl amine …
polymerization of trichlorosilane (SiHCl 3), boron trichloride (BCl 3) and methyl amine …
Tailored synthesis of amorphous SiCNO mesoporous fibers through combining a facile electrospinning process and microwave-assisted pyrolysis
In the current work, we first reported the fabrication of mesoporous SiCNO fibers by
electrospun polyureasilazane and polyvinylpyrrolidone precursor followed with a microwave …
electrospun polyureasilazane and polyvinylpyrrolidone precursor followed with a microwave …
Electrospun boron-containing mullite micro/nanofibers derived from monophasic sol: effects of sol concentration on morphology and microstructure
X Song, J Xu, Y Song, R Chen, Y Gao, Y Ma… - Journal of Sol-Gel …, 2023 - Springer
Continuous mullite fibers with ultrafine diameters and good thermal stability are an ideal
candidate to be used to prepare ceramic-based aerogels, sponges, or composites. In the …
candidate to be used to prepare ceramic-based aerogels, sponges, or composites. In the …
Preparation of gadolina stabilized bismuth oxide doped with boron via electrospinning technique
In this study, boron doped and undoped poly (vinyl) alcohol/bismuth–gadolina acetate
(PVA/Bi–Gd) nanofibers were prepared using electrospinning technique then calcinated at …
(PVA/Bi–Gd) nanofibers were prepared using electrospinning technique then calcinated at …
Morphological evolution of boron carbide particles: Sol-gel synthesis of nano/micro B4C fibers
Herein we present a novel non-catalytic sol-gel route to synthesize nano/micro boron
carbide fibers. By in-situ decoration of the precursor surface with boric acid crystals during …
carbide fibers. By in-situ decoration of the precursor surface with boric acid crystals during …
Evaluating use of boron-and hafnium-modified polysilazanes for ceramic matrix minicomposites
In this study, the potential of polymer-derived ceramic matrix composites (CMCs) is
demonstrated by the addition of thin ceramic coatings on carbon fiber (CF) bundles. Boron …
demonstrated by the addition of thin ceramic coatings on carbon fiber (CF) bundles. Boron …
The preparation of SiC ultrafine fibers containing low amount of oxygen by the electrospinning and pyrolysis of vinyl-modified polycarbosilane
B Yao, B Lu, Q Huang, ZR Huang, Q Yuan - Ceramics International, 2020 - Elsevier
The high-temperature stability of the SiC ultrafine fibers is limited by the massive amounts of
oxygen introduced during the oxidative curing process. In this study, vinyl-modified …
oxygen introduced during the oxidative curing process. In this study, vinyl-modified …