… The influences of surface treatment and the concentration of boehmite alumina (BA) particles
on polypropylene and polystyrene (PS) (80/20) blends produced via melt compounding …

… studied rheological properties of highly micro-filled systems with a capillary, dynamic, and
… Samples were pressed in aluminum pans and were heated two times from the ambient …

… of a thin layer polystyrene-coated spherical alumina particles … and the percentage of
polystyrene coating on the sintering … between alumina and PS, percentage of polystyrene binder …

… In the present study, alumina powder attained a green density of 58%TD. It is worth
noting that, for 10 vol% PS, the APS composite shows a relative density of ~ 62.5%TD while …

… The effect of filler loading on the tensile properties and melt flow index was also examined.
… loading of alumina particles (below 5 wt. %). However, agglomerates of sub-micro size were …

… [35] studied the effect of hybrid fillers comprised of CNTs directly grown on alumina …
Characterization on polystyrene/zinc oxide nanocomposites prepared from solution mixing. …

… The structure of montmorillonite consists of an octahedral alumina sheet between two …
laboratory scale micro injection molding equipment. During the molding process, the melt and …

… polystyrene (PS)/zinc oxide (ZnO) nanocomposite powders. The technique employs melt
mixing … of major significance for producing nanocomposite spherical powders in fields requiring …

… , yet metal-filled CPCs exhibit poor … the preparation of electrically conductive Cu-coated
alumina powder via ELD, which was then used, for the first time, as filler in a matrix of polystyrene…

… stable crystal structured Aluminum nitride (… melt-blending, compression moulding followed
by hot pressing for investigation of nano-mechanical properties of HDPE/AlN nanocomposites. …