… layer of PEDOT:PSS for air storage and barium hydroxide, Ba(OH) 2 as a hole blocking layer
at the rear c-Si/cathode … front-junction solar cell showed a power conversion efficiency (PCE…

… quantitatively isolated the cathodic contribution caused by … , which produced a solar to
hydrogen conversion efficiency of 0.1… metal layer (Sn) with double-sided tape, and the metal layer …

… through the hole transport layer. Although the insertion of PM6 between the perovskite
layer and the cathode appears to be harmful to electron transfer, a thin layer of PM6 and BHJ …

… cathode modifier for high-performance polymer solar cells. … layer/cathode, metals with low
work functions (WFs) (eg, calcuim, barium, and so on) have been widely utilized as efficient …

… SPSM have been reported recently with PCE reaching nearly 9% in conventional structures
with barium as cathode interlayer [15]. However, the conventional structure based BHJ …

… (ZnO/TiO 2 ) to improve the efficiency of dye sensitized solar cell. Cadmium and … Cathode
which is made of Al metal was deposited in the form of thin strips above the active layer under …

… material for efficient and cost-effective solar cells, owing to its … transport layer (ETL) to create
a high-performance solar cell … (HTL), which is subsequently collected by the cathode [50]. …

… Barium is an effective cathode material for use in heterojunction cells (Gupta et al. 2013).
The use of … “Barium: An Efficient Cathode Layer for Bulk-Heterojunction …

… a typical organic bulk heterojunction solar cell, respectively. Schemes 1-3 show the molecular
structures of donor, acceptor, and organic CBL layer molecules named in the manuscript. …

… The first perovskite photovoltaic solar cell of barium titanium … Recently, Bulk heterojunction
polymer solar cells are gaining … The cathode is defined at the top of the cell for the entire x– …