… mismatch between the substrate and coated layers. Al 2 … characteristics. This study was
aimed at investigating the triple-layered (HAp/Al 2 O 3 /TiO 2 ) thin film coatings deposited onto Ti-…

… a hydroxyapatite (HAp) coating layer on top of the Ti-6Al-4V substrate via sequent H2O2oxidizing
and RF-sputtering … adhesion between HAp coating layer and Ti-6Al-4V substrate. The …

… was prepared on the Ti-6Al-4V alloy by magnetron sputtering. … of the as-deposited coatings
were characterized by SEM/EDS, … the HA layer and the Ti-6Al-4V substrate to enhance the …

… coating on a TiO 2 nanotubular surface was developed to improve the biocompatibility of the
titanium (Ti) surface via magnetron sputtering. … ) was used as the substrate for anodization in …

… magnetron sputtering system equipped with a substrate holder, … Until now, sputtered
hydroxyapatite coatings have been … Lynn showed the fatigue resistance of hydroxyapatite to be …

… Ti coatings were deposited on silicon and Ti6Al4V substrate by radio-frequency (RF) magnetron
sputtering… electrochemical properties of the coatings were characterized by SEM, XRD, …

… In this way, implant materials with superior characteristics were obtained by combining the
properties of the bulk substrate and coating. Considering all of the above, there is an obvious …

… of Ti6Al4V alloy substrates manufactured by electron beam melting and coated with
hydroxyapatite … Sputtering ion beam cleaning was not performed on the samples to avoid altering …

… Surface characteristics can mediate the interaction by enhancing or affecting tissue …
substrates have been applied. In this work, the characteristics of HA-Si layers deposited on Ti6Al4V …

… The morphology of the obtained surface states was observed by using scanning electron
microscopy (Philips XL13ESEM) at low acceleration voltage (3 kV) after sputter coating with a …