… resins. The aim of this study was to evaluate … degree of conversion (DC) and temperature
rise in hybrid and low shrinkage composite resins cured by LED and Argon Laser curing lights. …

… of monomer to polymer in dental composite resins varies between 40% and 75% [9] or …
degree of conversion of photo-cured composites ranged from 43.5% to 73.8% [13]. The increase …

… pulp tissue, stimulate bacterial growth, and ultimately affect the … exposure, methods of visible
light activation, and temperature.… (QTH), plasma arc curing (PAC), and argon laser lamps.…

… significant change in the degree of conversion of composite resin with increasing both curing
time and light intensity… Degree of conversion and temperature rise during polymerization of …

… have all of the composite resin monomers converted to polymer … , alternative light sources
have been suggested, such as argon … , increased degree conversion of pre-heated composite …

… was characterized upon argon-ion slicing using … all composite cements showed a significant
increase in DC within a time interval up to 24 h, regardless of the initial degree of conversion …

… cement was interrupted, or due to a potentially lower exothermic temperature rise within the
resin. This situation may be similar to a previous report which found lower DC and KH values …

… 1 week after light curing using the following settings: 785-nm Ar-… polymerization, but gradually
increased to a level at 1 week … the degree of conversion of light-activated composite resins. …

… The environmental temperature during curing was 21 ± 1 C. Immediately after … The light
transmittance increased during the light curing; therefore it was assessed at three particular time …

… Furthermore, increased thickness more than 2 mm has a … Effect of temperature on the degree
of conversion and … determine the degree of conversion of light-activated composites resins. …