… period, PEEK secondary copings for telescopic attachments … evaluating retention forces of
implant overdenture attachments … Overdenture attachment selection and the loading of implant …

… assemblies were transferred to prosthetic blocks using the direct … period of 15 minutes per
day, 45 hours immersion period … load 16) . This wear is due to friction between the base and …

… The researchers compared a stud attachment (ERA) and … In the present study, the loaded
side denture-bearing areas … overdentures on 2 implants: 6-month fatigue retention values. …

… recently introduced implant overdenture attachment systems, … C, and cyclic loading for a
simulation period equivalent to 5 … and retention values of Locator attachments; therefore direct …

… and retain overdenture was better accompanied by a sufficient residual ridge to share the load
[16… flow and temperature within the testing period. Moreover, some studies suggested that …

… Within the limitation of this in vitro study and for a similar period … processing, the plastic
clips were picked up directly on the … the peak load forces were measured in Newtons using a …

… implants to support/retain a mandibular overdenture due to … time the denture is worn in the
mouth or loaded under function. … to the locator after an in vitro fatigue simulation period of 5.5 …

… After 3 months of Osseo-integration period, a tissue punch was … overdenture that retained
by TITACH attachment with direct … Moreover, it allows for standardization of points of load …

… artificial aging and after axial and non-axial loading. Initially [I… The primary crowns were
modelled in wax directly on the … a sufficient retention force is ensured over the tested period. It …

… stability and retention of the denture due to impaired load-… Osseointegration: the apparent
direct attachment or connection … the retention of 4 different color-coded ERA attachments (…