… In this work, we explore a silica–RMF composite aerogel system with different proportions
of each precursor. Synthesis conditions were fixed except for the silica–RMF ratio, allowing for …

… densities, we observe that shrinkage of the material during synthesis is higher for pure
aerogels, leading to higher densities for the same formulation compared to blanket-type samples (…

… [11] have synthesized the carbon aerogel reinforced by Al 2 O 3 nanofibers. The compressive
strength was measured up to 9.5 MPa. From this, improving the mechanical strength of …

… via a sol-immersion-gel process based on the in-situ polymerization of resorcinol (R), …
synthesis of MNOX-CEO2/reduced graphene oxide composite aerogels for low temperature …

… PR due to their similar sol–gel process. Binary PR/SiO 2 composite aerogels were prepared
… agent was proposed to synthesize thermal stable PR/silicone composites in which covalent …

… stable, as not only the initial thermal degradation temperature (T 5% and T 10% in Table
S3) but also residual weight decreased after the modification of MTMS in this low-temperature …

… In the present work, the synthesis of aerogels was carried out from a mixture of resorcinol–…
, a xerogel is obtained, whereas at low temperature, a cryogel is obtained. Carbon …

… A novel B 4 C–SiC composite aerogel is synthesized using nano boron carbide suspension,
3-aminopropyltriethoxysilane (APTES), and resorcinol–formaldehyde (RF) as precursors …

… Organic-inorganic hybrid aerogel blankets were synthesized in a one-pot synthesis process,
using a Resorcinol-Formaldehyde organic matrix and an APTES mineral matrix conjointly …

… Herein, we fabricated a resorcinol-formaldehyde/silica dioxide composite aerogel (RF/SiO
2 ) with a three-dimensional network structure using sol-gel, atmospheric pressure drying …