… This paper presents a critical assessment of the current knowledge about the mechanical …
On the other hand, as ABS is composed of synthetic monomer acrylonitrile and petroleum-…

… Consequently, the assessment of criteria is conducted with a focus on … examining the
failure surface morphology. This investigation aimed to comprehend the failure mechanism and …

… the influence of infill density in the mechanical strength was evaluated. Yield surfaces and
… applied to predict failures and improve reliability in FFF or fused deposition modeling (FDM) …

… amorphous polymers, with acrylonitrile butadiene styrene (ABS… roughness) and the mechanical
properties of the product. The … 52 when evaluating the dynamic mechanical properties, …

… whose mechanical properties have been evaluated. It was … printed utilizing the fused
deposition modelling technique by … an extended fracture failure mechanism rather than a brittle …

… A three-point bending test and tensile tests were conducted to evaluate the mechanical
properties of the resulting continuous CF-reinforced thermosetting composites. The results were …

… the mechanical properties of the printed parts. [ 66 ] Figure 3 depicts the mechanism in
the … the main reason for reduced mechanical strength in Acrylonitrile butadiene styrene (ASB) …

… FDM materials are the acrylonitrile butadiene styrene (ABS… mechanical properties and
anisotropy of FDM printed parts, and by changing it, the strength, toughness or failure mechanism …

… work, the mechanical performance of filaments based on acrylonitrile … on the fracture behavior
and failure mechanisms has not … This behavior suggests that mechanical properties were …

… ), and acrylonitrile butadiene styrene (ABS), were used in the fused deposition modeling (…
of 40, 65, and 170 F to assess its impact on mechanical properties. For providing the 170 F (hot…