… W display mainly irregular interconnected pores with a minimum … titanium base samples
they were heat treated, chemically treated and infiltrated into the pores with calcium phosphate …

… and calcium phosphate-based ceramics, have been used as coatings on the surface of Ti-…
and physiological properties of Ti-based scaffolds [13]. Numerous studies have focused on …

… The control of surface properties and porosity of calcium phosphate affects cell/protein adhesion
… They used Ti-6Al-4 V alloys with porous surfaces that were biocompatible in the human …

… To this end, the trace elements of copper and zinc were integrated into calcium phosphate
based coatings by electrochemically assisted deposition. In addition to their antimicrobial …

… Calcium phosphates (CaPs) are the major inorganic component of bone tissues, and thus
owning inherent biocompatibility and osseointegration properties. As such, they have been …

… porous additively manufactured Ti6Al4V (Ti64) scaffolds modified with biocompatible calcium
phosphate … In order to improve this situation, different surface modifications of Ti and Ti64 …

… of a calcium phosphate layer on the … porous Ti and Ti alloy scaffolds include sintering of
the metal powder [8], plasma spraying of the powder onto a dense substrate [9], sintering of Ti …

… The development of a patient-specific, titanium-reinforced, calcium phosphate–based (CaP-Ti…
(9%), and calcium pyrophosphate (6%) with 43% porosity and is precision molded over the …

… bone compared to uncoated Ti [10]. This is because HA is a calcium phosphate similar to
the … based on the induction of calcium phosphate nucleation at material surfaces through …

… Porous Ti cylinders with 25% volume porosity were fabricated using … porous implants. It
was envisioned that such an approach of adding a bioactive-doped CaP layer on the porous Ti …