… In the present study, alumina powder attained a green density of 58%TD. It is worth
noting that, for 10 vol% PS, the APS composite shows a relative density of ~ 62.5%TD while …

… The effect of filler loading on the tensile properties and melt flow index was also examined.
… loading of alumina particles (below 5 wt. %). However, agglomerates of sub-micro size were …

… The structure of montmorillonite consists of an octahedral alumina sheet between two …
laboratory scale micro injection molding equipment. During the molding process, the melt and …

… polystyrene (PS)/zinc oxide (ZnO) nanocomposite powders. The technique employs melt
mixing … of major significance for producing nanocomposite spherical powders in fields requiring …

… The examined samples typically weighed around 3-5 mg, were placed in an aluminum pan
… Design and testing of high-density polyethylene nanocomposites filled with lead oxide micro- …

… introduced an easy method for graphene/polystyrene nanocomposite fabrication. First, …
Second, the obtained PMMA nanoparticles are added to aluminum sec-butoxide solution to …

… filled composites and the λ of the composites prepared in this paper. It can be seen from the
figure that the λ of the composites prepared … The reason why the composites prepared in this …

… of alumina (Al 2 O 3 ) content and diameter on the viscosity characteristics of the alumina/…
The composites were fabricated by melt mixing with the two-rotor continuous mixer. The …

… In this paper, the α-phase content of spherical aluminum (S–Al 2 O 3 ) increases after
calcination, leading to the viscosity of composites increasing sharply but was only slightly improved …

… In this paper, the surface hydroxylation modification of nano-alumina (nano-Al 2 O 3 ) to …
-KH560 ) thermally conductive nanocomposites were fabricated by melt blending technique and …