… PCL tubular scaffold with … grafted it onto the surface of electrospinning polycaprolactone
(PCL)/polyurethane (PU) composite tube to obtain a functionalized small-diameter vascular graft …

… Thrombosis is the main cause of failure of small-diameter … reported for small diameter
vascular grafts prepared using … ) with platelet-rich plasma, electrospun grafts were not capable of …

… used for the production of small diameter vascular grafts (<6 mm internal … vascular grafts
are in line or even better than the ones found using aspirin or DIP-loaded electrospun scaffolds …

… which is associated with thrombosis in the grafted area 9 . In … the capacity of the scaffold in
preventing platelet adhesion. … a bilayer tubular vascular graft made up of co-electrospun TPU-…

… is the high risk of thrombosis formation. When it comes to its prevention, aspirin is often …
The small-diameter vascular grafts developed in this study were composed of a polymeric …

… (MD) composite nanofiber was prepared via electrospinning technique. The results showed
that the … The overall results introduce that 2% AS incorporated in the PCL/MD electrospun …

… small-diameter vascular grafts (SDVGs) has not been investigated. Therefore, the oxygen
access state of electrospun PCL grafts … of small diameter (<6 mm) owing to thrombosis and …

… They are also susceptible to thrombosis, calcification, … and for preventing the calcification
of scaffolds [ Citation 84 ] . … prepare small diameter tubular vascular grafts in future studies. …

… development of small-diameter TPU-based vascular grafts with … of blood clots on the inner
surface of these tubular grafts. … within the 3D-printed grafts, preventing a higher drug release. …

… Small-diameter vascular grafts fabricated from synthetic … , owing to poorly orchestrated tissue
formation, the onset of thrombosis, … poly(ε-caprolactone) (PCL) microfiber vascular grafts by …