Ceramic matrix composites (CMCs) have lots of distributed manufacture-induced defects,
which affect the mechanical response at high temperature heavily. In this paper, in-situ …

X-ray computed tomography (X-CT) and digital image correlation (DIC) are typical methods
to capture in-situ, full-field information during mechanical tests. In this paper, above two …

Carbon fiber reinforced carbon matrix (C/C) composites have been used in aerospace
applications due to their excellent performance. Exploring their failure mechanisms is a …

Carbon fiber-reinforced silicon carbide composites (C/SiC) are widely used in lightweight
aerospace structures for thermal protection due to its excellent mechanical properties. The …

In this study, the deformation response and failure behavior of a plain-woven C/SiC
composite were investigated under on-axis and off-axis tensile loading. Digital image …

The construction and examination of meso-structural finite element models of a Chemical-
Vapor-Infiltrated (CVI) C/SiC composite is carried out based on X-ray microtomography …

Carbon/glass fibre-reinforced plastic (C/GFRP) offers advantages in engineering
applications due to its low cost. However, the mechanism underlying the evolution of …

5 D woven SiC f/SiC composites are candidate materials for high-temperature components.
This work presents the flexural progressive damage behaviors of 2.5 D woven SiC f/SiC …

Abstract 2D-C/SiC composites have widely been used in aeronautical and aerospace
engineering, but their mechanical behaviors under small-mass and high-speed impact have …

The analysis of failure behaviors of continuous fiber-reinforced ceramic matrix composites
(CMCs) requires the characterization of the damage evolution process. In service …