Wire and arc additive manufacturing cold metal transfer® enable the defect-free soldering of
poorly weldable alloys, such as AA6061. Thin-walls have been successfully built with two …

There is an increasing interest in additive manufacturing of high strength aluminium alloys
built with wire and arc additive manufacturing (WAAM) technologies. Al-Cu alloys are …

An aluminium alloy (AA) cylinder measuring 145 mm diameter (∅) and 11 mm height was
produced by wire and arc additive manufacturing (WAAM) using ER4043 filler wire and cold …

Wire-arc additive manufacturing (WAAM) has received considerable attention in the past
years due to advantages in terms of deposition rate, design freedom, buy-to-fly ratio and …

Wire-arc additive manufacturing (WAAM) has received considerable attention in the past
years due to advantages in terms of deposition rate, design freedom, and buy-to-fly ratio …

In this study, the microstructure and mechanical properties of wire arc additive manufactured
205A high strength aluminum alloy were investigated. The samples in both the as-deposited …

Wire arc additive manufacturing, employing conventional fusion welding processes, shows
excellent versatility and can therefore be used for structural modifications of existing parts to …

One of the challenges in additive manufacturing (AM) of metallic materials is to obtain
workpieces free of defects with excellent physical, mechanical, and metallurgical properties …

Processing of aluminum alloys by wire arc additive manufacturing (WAAM) gained
significant attention from industry and academia in the last decade. With the possibility to …

The wire arc additive manufacturing (WAAM) has been widely used for the development of
aluminum alloy based components and parts used in the aerospace and automobile …