… the retention of the 2 groups during the follow up period at the time of loading ,three, then six
… between the 2 groups with higher retention value for direct pick up metal housing and nylon …

… in acrylic blocks using direct attachment pick-up techniques. Metal … After the simulated
period of 12 months, the final retentive forces (… Many oral factors, including masticatory loading, …

… during insertion, loading and removal of an overdenture. A … group over a period of three to
nine years [20]. In patients … All maintenance interventions directly related to the attachment …

… they were used for a long period of time it was not possible to … reasonable since it has a
direct contact with the integrated … of retention characteristic, the attachment transfers the load in …

… functional loads homogeneously on the denture bearing tissues… blockout is difficult and direct
transfer of the superstructure bar … Although ERA gray exhibited highest retention among all …

… load cell of 1 kN. The systems evaluated showed satisfactory … attachments after a simulated
6-month period of overdenture … all the overdenture attachments lose their retention over time…

… -supported overdentures retained by two ball attachments. … nylon inserts were allocated,
and then were observed by a … used for load transmission from the load cell to the overdenture …

… /CAM resin blocks and cyclically loaded with 19.6 N along the … axis, corresponding to a
simulated fatigue period of 5.5 years … This retention loss was directly attributable to the wear of the …

… Within the limitation of this in vitro study and for a similar period … processing, the plastic
clips were picked up directly on the … the peak load forces were measured in Newtons using a …

… Retentive load was measured in situ, as a function of cycles. … wearing their denture for a
period of only a few weeks [2]. … only and the clinical retention of denture frameworks relies on a …