Manufacturability of fine-celled cellular structures in rotational foam molding
R Pop-Iliev, D Xu, CB Park - Journal of cellular plastics, 2004 - journals.sagepub.com
Any closed-cell polyolefin foam production tends to achieve the highest possible cell size
distribution uniformity, cell size reduction, and cell density augmentation. However, the …
distribution uniformity, cell size reduction, and cell density augmentation. However, the …
Strategies to achieve a uniform cell structure with a high void fraction in advanced structural foam molding
JWS Lee, J Wang, JD Yoon… - Industrial & engineering …, 2008 - ACS Publications
Structural foams offer numerous advantages over their solid counterparts, including greater
geometrical accuracy, the absence of sink marks on the final product's surface, lower weight …
geometrical accuracy, the absence of sink marks on the final product's surface, lower weight …
Foaming with polymer microspheres in rotational molding: The effect of coupling agent
D D'agostino, E Takacs… - Journal of cellular …, 2004 - journals.sagepub.com
The use of polymer microspheres for producing fine-cellular foams is a new development in
rotational molding. In previous studies, some reduction in mechanical properties has been …
rotational molding. In previous studies, some reduction in mechanical properties has been …
Investigation of the mold-filling phenomenon in high-pressure foam injection molding and its effects on the cellular structure in expanded foams
M Tromm, V Shaayegan, C Wang, HP Heim, CB Park - Polymer, 2019 - Elsevier
Mold filling plays a crucial role in determining the cells' structural morphology and uniformity
in high-pressure foam injection molding. This process affects the formation, deformation, and …
in high-pressure foam injection molding. This process affects the formation, deformation, and …
Polystyrene foam with high cell density and small cell size by compression‐injection molding and Core Back foaming technique: evolution of cells in cavity
T Bai, B Dong, M Xiao, H Liu, N Wang… - Macromolecular …, 2018 - Wiley Online Library
Many efforts have been made to obtain uniform cell structures from foam injection molding
techniques. However, cell nucleation mechanism and complex dynamics during the cell …
techniques. However, cell nucleation mechanism and complex dynamics during the cell …
Improvement of cell opening by maintaining a high temperature difference in the surface and core of a foam extrudate
This article presents an extrusion-based, open-cell foaming process using thermoplastic
polymers such as polystyrene (PS) and polycarbonate (PC) with supercritical CO2. Our …
polymers such as polystyrene (PS) and polycarbonate (PC) with supercritical CO2. Our …
More experiments on thermoplastic foam nucleation
ST Lee - Journal of cellular plastics, 1994 - journals.sagepub.com
INTRODUCTION variety of thermoplastic foams have been available through Avarious
foaming technologies in the market for a long time. Their densities range from 0.8 g/cc to …
foaming technologies in the market for a long time. Their densities range from 0.8 g/cc to …
The importance of timely polymer sintering while processing polypropylene foams in rotational molding
Producing polypropylene (PP) foams with satisfactory cell morphologies in rotational foam
molding is feasible. However, the narrow interval between the melting temperature of PP …
molding is feasible. However, the narrow interval between the melting temperature of PP …
Combining foam injection molding with batch foaming to improve cell density and control cellular orientation via multiple gas dissolution and desorption processes
YG Zhou, TY Chen - Polymers for Advanced Technologies, 2020 - Wiley Online Library
In contrast to solid parts fabricated through conventional injection molding (CIM), foamed
parts manufactured via foam injection molding (FIM) exhibit substantial variations in …
parts manufactured via foam injection molding (FIM) exhibit substantial variations in …
Visual studies of model foam development for rotational molding processes
M Emami, E Takacs, MR Thompson… - Advances in Polymer …, 2013 - Wiley Online Library
This work explores the foam development process under atmospheric pressure as
applicable to rotational molding, investigating the influence of the processing parameters …
applicable to rotational molding, investigating the influence of the processing parameters …