Inverters and loads can freely connect to any node in a meshed parallel inverters system, leading to variations of line impedance between two nodes and the structure of the electric network. More challenges exist for proportional load-sharing control in such a system. An improved proportional load-sharing strategy for a meshed parallel inverters system with complex impedances is proposed in this paper. The RL-type droop method is modified through injecting the power droop information of all other inverters, which can improve the load-sharing accuracy to some extent and completely compensate the voltage amplitude and frequency deviations caused by droop equations under accurate load-sharing conditions. Besides, an adaptive virtual resistance tuned by the integral of the linear combination of output active and reactive powers, is added to eliminate load-sharing errors. In addition, the central controller broadcasts the control variables to all inverters. This improves the simultaneity of control data and minimizes the mismatch of control delay. Three modified droop methods are compared with the small-signal analysis and simulation. Experimental results are presented to investigate the performance of the proposed control strategy.