… a dynamic clamp protocol using free, fully integrated, open-source software (StdpC, for spike
timing-dependent plasticity clamp)… hardware, costly commercial software, experience in real-…

… In this article we present an improved dynamic clamp software package “StdpC” that is …
To demonstrate the power and versatility of the dynamic clamp software StdpC we will now …

… artifact-free dynamic clamp experimentation with a single electrode. Here we describe an
AEC method for the free dynamic clamp software StdpC. The AEC component of StdpC is the …

… After starting the dynamic clamping, in each clamping cycle the software decides whether
it is time to perform a saving by compering the last saving time and the current time. This way …

… We wrote our dynamic clamp software using the Arduino IDE. The code is contained in
the Extended Data 1 folder dynamic_clamp and the main file is called dynamic_clamp.ino. …

… and National Instruments) and software (WaveMetrics IGOR) … dynamic clamp on the slave
setup in WaveMetrics IGOR. The panel assists the user to select features of the dynamic clamp …

… We demonstrate that each of these errors affect dynamic clamp accuracy in a … Our results
suggest that software-based systems are sufficient for many … StdpC: a modern dynamic clamp …

… of a patch-clamped cell. In the present chapter, we describe the dynamic clamp on the basis
of its … As an exception, the StdpC dynamic clamp software [21], which does not rely on fixed …

… range (Table 2) by matching the amplifier specifications to I/O gain settings that are controlled
through the G-clamp program. The embedded processor comes from the manufacturer …