… Then the effects of various parameters on the deformation … the effect of hot deformation on
austenite decomposition, a … cooling. The mill rolls of 60 mm diameter had a speed ofO.S m …

… depend on the transformation temperature region and cooling rate. Over the years, … of
effects of chemical composition and prior austenite grain size, but only one optimized parameter …

… These studies on the kinetics and thermodynamics of the … TMCP parameters, austenite
decomposition behavior and … the effect of deformation reduction on austenite decomposition …

… on the field of austenite decomposition and its effect on final … the effects of processing
parameters during continuous cooling … the kinetics of austenite decomposition during continuous …

… effect of carbon (0.1–0.7% m C) and nitrogen (0.3–0.4% m N) enrichment of a low-alloyed
steel (23MnCrMo5) on its austenite decomposition kinetics during cooling … kinetic parameters …

… Furthermore, the effects of cooling rate and austenite grain … of transformation kinetics and
austenite decomposition products… in austenite phase leads to changes in lattice parameters. As …

… equiaxed, which is not influenced by the anisotropy of the … The influence of cooling rates on
the growth kinetics and … However, these models are too complex or the parameters have to …

… In the present study, austenite decomposition kinetics, … dilatometrically, using 15 cooling
rates. Dilatometer samples 3 … for this study because the parameters required by the model are …

… austenite decomposition kinetics under continuous cooling … , most of these models contain
parameters which need to be … , thus having an influence on the kinetics of the transformation…

… and also due to the transformation kinetics that may prevent the … into consideration the
influence of the cooling rate and aging … Its lattice parameter is three times that of the austenite that …