Investigation of experimental study of end milling of CFRP composite
Carbon fiber-reinforced plastic (CFRP) composites are materials that are difficult to machine
due to the anisotropic and heterogeneous properties of the material and poor surface
quality, which can be seen during the machining process. The machining of these materials
causes delamination and surface roughness owing to excessive cutting forces. This causes
the material not to be used. The reduction of damage and surface roughness is an important
aspect for product quality. Therefore, the experimental study carried out on milling of CFRP …
due to the anisotropic and heterogeneous properties of the material and poor surface
quality, which can be seen during the machining process. The machining of these materials
causes delamination and surface roughness owing to excessive cutting forces. This causes
the material not to be used. The reduction of damage and surface roughness is an important
aspect for product quality. Therefore, the experimental study carried out on milling of CFRP …
[PDF][PDF] Investigation of experimental study of end milling of CFRP composite
Carbon fiber-reinforced plastic (CFRP) composites are materials that are difficult to machine
due to the anisotropic and heterogeneous properties of the material and poor surface
quality, which can be seen during the machining process. The machining of these materials
causes delamination and surface roughness owing to excessive cutting forces. This causes
the material not to be used. The reduction of damage and surface roughness is an important
aspect for product quality. Therefore, the experimental study carried out on milling of CFRP …
due to the anisotropic and heterogeneous properties of the material and poor surface
quality, which can be seen during the machining process. The machining of these materials
causes delamination and surface roughness owing to excessive cutting forces. This causes
the material not to be used. The reduction of damage and surface roughness is an important
aspect for product quality. Therefore, the experimental study carried out on milling of CFRP …
以上显示的是最相近的搜索结果。 查看全部搜索结果