In this paper, we describe microchannel fluid behavior using a numerical model based on micropolar fluid theory and experimentally verify the model using micromachined channels. The micropolar fluid theory augments the laws of classical continuum mechanics by incorporating the effects of fluid molecules on the continuum. The behavior of fluids was studied using surface micromachined rectangular metallic pipette arrays. Each array consisted of 5 or 7 pipettes with widths varying from 50 to 600 μm and heights ranging from 20 to 30 μm. A downstream port for static pressure measurement was used to eliminate entrance effects. A controllable syringe pump was used to provide flow while a differential pressure transducer was used to record pressure drop. The experimental data obtained for water showed an increase in the Darcy friction factor when compared to traditional macroscale theory, especially at the lower Reynolds number flows. The numerical model of the micropolar fluid theory predicted experimental data better than the classical Navier–Stokes theory and the model compares favorably with the currently available experimental data.