… Laser backwriting process on pyrex glasses has been reported in this work, using a simple
ablation … Ablation was achieved using a Nd:YAG Q-switched laser, with a repetition rate of 50 …

… of waveguides by laser ablation of metal targets on pyrex glasses. An … , using a profilometer
and have compared the results for the different configurations, speeds and metal targets. We …

… (LAB) process using a commercial Nd:YVO 4 laser fitted with a beam steering … and Al metal
targets were evaporated onto glass substrates by simple irradiation through the same glass …

… The laser back writing process (LBW) on the glass and quartz has … , a steel target was
irradiated with Q-switched Nd:YAG laser … Keywords: Laser Backwriting, Laser ablation, Plasmon, …

… laser backwriting process on glass by laser ablation of metal targets, in order to fabricate
waveguides on pyrex glasses… of waveguides by laser ablation of metal targets on pyrex glasses. …

… The advantages of planar glass waveguides and their preparation via Laser Ablation
Backwriting (LAB) of metal targets have … substrate due to the laser ablation backwriting process. …

… A pulsed laser ablation backwriting technique with high … process: LIRT (laser-induced
reverse transfer) of silver from the target to the glass, with a partial and secondary LIFT (Laser-…

… in laser ablation back-writing of metals deposited onto glass … the metal species evolving
from the target during the ablation … LBW process was done by laser ablation of a steel target on …

… present also Laser Induced Plasma Assisted Ablation (LIPAA) … thick galvanized steel target
is placed under the glass substrate. … The glass substrate is of course transparent to laser …

… a Q-switched Nd:YAG laser working at 355 nm, was used to study the potential of a laser
backwriting process for the fabrication of optical waveguides via an index of refraction change. …