… investigates the laser cladding of machining swarf of a corrosion resistant material (Inconel
617) on a mild steel substrate and the change in properties this produces. Alloy 617 is a solid-…

… measurement, the microstructure of clad layers of laser cladding of inconel 617 with Ni-10
wt% Al and Ni-30 wt% Al premixed clad powders of different cladding speeds was inserted to …

… Applications requiring discrete clad areas such as valves and valve seats have been … of
clad layers of laser cladding of Inconel 617 with Ni-10%Al and Ni-30%Al premixed clad powders. …

… as a protective cladding [16]. Similarly, work has been reported on laser cladding Inconel 690,
… This report investigates the feasibility of laser cladding Inconel 690 powder on an Inconel …

… Laser cladding is a very complex coating technique due to the high number of variables.
The geometrical dimensions of the clad layer are mainly related to the laser … increasing laser …

… 3% to 20% in laser cladding process [40]. This suggests that CMT can produce low dilution
overlays which are similar to that produced by laser coating techniques. The trend shown by …

… of regular laser peened as well as thermally-engineered laser peened Inconel 617 under …
treatment types, it is observed that laser peening improves the tribological characteristics of …

… , laser cladding as-deposited coatings also presented precipitates A 2 B-type Laves phases
due to the dilution effect from laser cladding … present in the laser cladding coating, were re-…

… In the present study, laser surface treatment and corrosion properties of Inconel 617 alloy
after 37,000 h of operation as a transition piece of a gas turbine engine are investigated. The …

… The present study investigated the effect of TIG and laser cladding of Inconel 625 coating
over an Inconel 738 substrate on its hot corrosion resistance. The hot corrosion test was …