… during monotonic multiaxial loading of specimens made from SS316L, produced by SLM …
In this study, four types of notched specimens were investigated under monotonic testing. …

… of structures and unique material characteristics present in SLM … economically and
expeditiously characterize SLM materials. … so as to apply them to samples manufactured via SLM. …

… All specimens include a gauge section made of 4 × 4 × 4 ECs with ρ ‾ = 0.2 , and layers of
ECs … The FE models of the ECs have been created within the commercial FE code ANSYS®. …

… measurements during monotonic compression tests and was … In Section 5, we present FE
simulations of the tension, … two opposite notches initially aligned with the axis of the sample, …

… tubular specimens were subjected to uniaxial tensile tests to … of (1 1 0) in the SLM-manufactured
SS316L was observed to be … and experimental approaches to establish a new model, …

… produced by laser powder bed fusion could be predicted with high accuracy by the finite
element model… To calculate the stiffness of the experimental specimen, we should consider a …

… The focus on monotonic and HCF performance is attributed … models which are found in
commercial finite element (FE) … fatigue tests were performed just on SS316L produced by SLM …

… using inverse finite element modelling. The porous plasticity … The model provides a monotonic
decrease in ductility for … the specimen which is not fully developed in the FE simulations …

… Kuncicka, Monotonic Tension-Torsion Experiments and FE Modeling on Notched Specimens
Produced by SLM Technology from SS316L'Materials 2021,33. Nicholas Beattie, Noah …

… constitutive modeling to both support experimental findings, … only manufacturing the
specimens used in this study, but for … Modeling the Influence of build orientation on the monotonic …