Study on the electrical and optical properties of ITO and AZO thin film by oxygen gas flow rate

SM Kim, YS Rim, MJ Keum, KH Kim - Journal of electroceramics, 2009 - Springer
SM Kim, YS Rim, MJ Keum, KH Kim
Journal of electroceramics, 2009Springer
Transparent conductive oxide (TCO) thin films such as tin doped indium oxide (ITO), zinc
doped indium oxide (IZO) and Al doped zinc oxide (AZO) have been widely used as
transparent electrode for display. ITO and AZO thin films for display was prepared by the
facing targets sputtering (FTS) system. The FTS method is called a plasma-free sputter
method because the substrate is located apart from plasma. This system can deposit the thin
film with low bombardment by high energetic particles in plasma such as γ-electrons …
Abstract
Transparent conductive oxide (TCO) thin films such as tin doped indium oxide (ITO), zinc doped indium oxide (IZO) and Al doped zinc oxide (AZO) have been widely used as transparent electrode for display. ITO and AZO thin films for display was prepared by the facing targets sputtering (FTS) system. The FTS method is called a plasma-free sputter method because the substrate is located apart from plasma. This system can deposit the thin film with low bombardment by high energetic particles in plasma such as γ-electrons, negative ions and reflected Ar atoms. ITO and AZO thin films were deposited on glass substrate at room temperature with oxygen gas flow rate and input power. And the electrical, structural and optical properties of the thin films were investigated. As a result, the resistivity of ITO, AZO thin film is 6 × 10−4 Ω cm, 1 × 10−3 Ω cm, respectively. And the optical transmittance of as-deposited thin films is over 80% at visible range.
Springer
以上显示的是最相近的搜索结果。 查看全部搜索结果