[PDF][PDF] The effect of workpiece hardness and cutting parameters on temperature, surface roughness and tool wear in ultrasonic assisted turning
… In this study, the effects of cutting speed, feed rate, conventional machining conditions,
and vibration machining conditions at three different hardness of 15, 30, and 45 Rockwell C
for the workpiece on surface roughness and tool wear were evaluated. The experiments
were designed at full factorial, and a total of 54 experiments were performed. The results
showed that at higher … The surface roughness (Ra) in machining by means of ultrasonic
vibrations is up to about 36% less than conventional machining in various machining …
and vibration machining conditions at three different hardness of 15, 30, and 45 Rockwell C
for the workpiece on surface roughness and tool wear were evaluated. The experiments
were designed at full factorial, and a total of 54 experiments were performed. The results
showed that at higher … The surface roughness (Ra) in machining by means of ultrasonic
vibrations is up to about 36% less than conventional machining in various machining …
Bayat M, Amini S. The Effect of Workpiece Hardness and Cutting Parameters on Temperature, Surface Roughness and Tool Wear in Ultrasonic Assisted Turning. Modares Mechanical Engineering. 2022; 22 (06): 357-369.
lcq.modares.ac.ir
以上显示的是最相近的搜索结果。 查看全部搜索结果