… The ceramic foams utilized in this work were manufactured by the replica technique,
whereby the filaments of an organic foam are coated with a ceramic suspension. A subsequent …

… The ceramic foams utilized in this work were manufactured utilizing the replica technique,
where a polymeric foam has its filaments coated with a ceramic suspension. A subsequent …

… that the pore diameter increased for thinner ceramic foam slices … that the pore size (d c ) of
ceramic foams obtained by image analysis was very sensitive to the cell layers captured by the …

… on the square of the relative density is a good description for the linear elastic behaviour of
… and closed-cell) and ceramic foams with varied densities. The large scatter of available data …

… from particle-stabilized foams is closely associated with the connectivity between bubble-…
the connectivity of pore structure, the zirconia ceramic foams were fabricated by direct foaming …

… only on the medium, quantify the viscous and inertial effects on the … 10 pores per linear inch
ceramic foam filters are used to … pletely distinct permeability constants depending on the data …

… filtration and subsequent permanent clogging of the filter. … , microcellular ceramic foams
must have their permeability … , the permeability to gas flow of microcellular ceramic foams, …

… The open-cell ceramic foams used in this work were fabricated by Vesuvius Inc. … the ceramic
foams were manufactured by using the replication method, the former polyurethane foam …

… The cellular microstructure of glass-ceramic foams was … properties of the LZSA glass-ceramic
foams were obtained at 750 … used to identify the phases of the LZSA glass-ceramic foams. …

… The aim of this work was the fabrication of alumina based ceramic foams with an open pore
… struts, which increase the specific surface area of the foam structures and thus enhance their …