… The mean PGV was much higher for spots printed on the HTA polystyrene substrate and on
the glass substrates with a contact angle of 61 and 75, and the highest signal was observed …

… At high anodization current densities, evidently, that increasing porosity and morphology …
angle. Thus, by varying the conditions for obtaining porous silicon and the type of substrate, it is …

… materials' interactions with water [via water contact angle (WCA) measurements] as these …
Although this aspect of wettability on porous 3D substrates is not a primary emphasis of this …

… topographical impacts of the substrate on the print development, it would have been interesting
to compare observations made with that of contact angle measurements, both influenced …

… For substrates with contact-angle hysteresis, we first estimate the local contact angle θ0 …
the value of C at respective ghost cells (located inside the substrate) by (2.4) if θ0 is outside the …

… porous films with high surface roughness. We present two alternative methods to measure
porosity … apparatus that creates porous films by mounting the substrate at an angle relative to …

… substrate. However, if the contact line perimeter samples enough positions on the substrate,
… only depend weakly on the tilt angle and position on the substrate. A plot of the measurable …

… In fact, macroscopic water contact angle measurements (see … APA substrates in order to
investigate the effect of pore size—… Au surface) for the largest pores with smallest wall thickness (…

… , with some choice of lower and higher contact angles, respectively, ascribed to brine … by
contact angle measurements of crude oil drops on smooth planar water-wet substrates in brine …

… rotational angle measurements were … measured data and details such as interface roughness
in between PSFP and the silicon substrate as well as between the high and low porosity …